اخبار القسم en
Lec. Dr. Mohammed Kashkoul Alwan, academic staff in Department of Materials Engineering / University of Technology, published a scientific research in Clarivet Journal by Elsevier publisher entitled
)Effect of perlite particles on the durability of the separation of layers of epoxy composites reinforced with glass fiber(
The study examined the mechanical properties such as the tensile strength and the strength of the fracture of layers and focuses on the use of perlite particles as a slanted and reinforcing material for the matrix. The results of the tests showed an improvement in the mechanical properties of the layered material compared with the results obtained for the matrix material.
On February 26, 2018, Department of Materials Engineering / University of Technology held the meeting of public staff with the presence of Prof. Dr. Amin Dawai Thamer; President of the University of Technology; and Assist. Prof. Dr. Ahmed Hassan Al-Ghabban; the Head of the Department; and the assistants of scientific and administrative assistants and the presence of all teaching staff. The President of the University addressed several important issues that included:
- It is necessary to determine educational process, and maintain the reputation of the university and develop it by keeping pace with the global developments and which would be achieved by active contribution of researchers, technical and administrative staff.
- The success of any department of the university is considered the success and progress of the university. Also, as the president of the university insisted and stressed on the independence of the university from the political parties to serve everyone in our community and stressed on the necessity to participate actively in the coming electio
- It is necessary to contribute in development of scientific research through the provision of scientific research in accordance with the international classifications and invite researchers to make more efforts and progress. Also, it has had been emphasized to participate in the initiative 250 global scientific research project, which aims to raise the classification of the university in over all the world as well as encourage staff who is with scientific degrees (professors) to form research teams in order to transfer their expertise which contributes to develop and enhance the scientific researches.
- the university has goals and plans on the near and distant perspective, therefore he emphasized to work in the e-learning system and urge the completion of all its requirements in keeping with the development in international universities and for the purpose of facilitating the process of education, which enhance the process of development and the advancement of scientific level to serve community.
- it has been guided some of the instructions for the University Day and the graduation ceremonies, so emphasize the need to abide by the Ministry's laws and instructions issued in this regard.
- Finally, the president of the university listened to the questions and opinions of the lecturers. Also Assist. Prof. Dr. Ahmed Hassan Al-Ghabban; Head of the Department; advised to abide by all the instructions directed by the President of the University, wishing all the best to exerting more efforts to serve our country.
On 29/1/2018, the president of University of Technology / prof Dr. Amin Daway Thamir, grants a certificate of appreciation to following students as complete their higherstudies requirements in limited period under the university order with the number MJ / 24/153 dated 30/1/2018:
- Ay noor Ibrahim ( M.Sc. degree)
- Hussein Ali Atwan (Ph.D degree)
- The president of University of Technology / Prof. Dr. Amin Daway thamir, grants a book of thanks to Hwazen Salame Fadhal, number 138/9 in 28/1/2018, to her efforts to complete master degree requirement within limited period.
- The president of University of Technology / Dr. Amin Dawaythamir, grants a book of thanks number144/9 in 29/1/2018 to: Prof Dr. Saad Badry Hasson Farid, Asst. Prof. Dr. Sohama Essa saleh, & Asst. Prof Dr. Jawad K.Oleiwi, they are teachers in Department of Materials Eng. As their efforts of supervising the students of higher studies, which assisted students in completing studies requirements within the limited period.
- The president of University of Technology /Prof. Dr. Amin Daway Thamir, grants a book of thanks to, Asst. Prof Dr. Akram Rheem. Jabr, and Asst. Prof Dr. Aseel Basem Abed-Hamead, Assist Prof Dr. Kadeem Mttar Shebeab, as their efforts of supervising the students of higher studies, which assisted students in completing studies requirements within the limited period.
In 30/1/2018, - On 30/1/2018 was discussed graduate student (Master) Nebras Said Jassim for her thesis tagged:(Manufacturing and properties of composite materials with a metal base of recycled aluminum and reinforced with nanoparticles) had been discussed by commit which consist of following members
|
1 |
Member/Chair |
University of Technology- Department of Materials Eng. |
Asst. prof Dr. Alaa Hassan Ali |
|
2 |
member |
Babylon university |
Asst. prof Dr. Haider H. jaber |
|
3 |
member |
University of Technology- Department of Materials Eng. |
Asst. prof Dr. Ahmed Ameed Zeen Alabdeen |
|
4 |
Member/supervisor |
University of Technology- Department of Materials Eng. |
Asst. prof Dr. Fadhil Abbas Hashim |
|
5 |
Member/supervisor |
University of Technology- Department of Materials Eng. |
Asst. prof Dr. Neven Jamal Abdel Alkader |
Thesis discussion using recycling metallic materials, Al alloy (A201), in preparation composite materials with different weight fraction of silicon carbide and boron nitride, (2%, 4%, 6%, 8%), by casting method.
The results show that the higher hardness can be obtained at adding (6%)ofboron nitride, (150.7) V.H, while higher hardness for composite contain silicon carbide was when adding (8%) silicon carbide, (131.1) V.H. wear rate decrease gradually with increasing weight fraction of nano powders, the lower wear rate was when adding (6%) of boron nitride, and (8%) of silicon carbide, maximum tensile strength had increasing at all nano powder additions, finally, corrosion resistance had increasing by adding nano particles comparing with based metallic alloy, and recycle materials can use for marine applications.
The thesis had been scenically evaluated by Assist Prof Dr. Mohsen Abed Allah, Baghdad University/ Department of Mechanical Engineering, and linguistically by Assist Prof Dr. Samir Ali Amen, University of Technology/ Department of Mechanical Engineering.
The discussion took place at higher studies hall / building C, and master degree had been granted to student.
In 28/1/2018, - On 28/1/2018 was discussed graduate student (master) Mustafa Thaer Hassan for his thesis titled “Manufacturing ideal material for exterior construction applications” had been discussed by commit which consist of following members.
|
1 |
Member/Chair |
University of Technology- Department of Materials Eng. |
Prof. Dr. Saad Badry. Hasoon |
|
2 |
member |
Babylon university College of materials Eng. |
Asset. Prof Dr. Amar Ali Dishar |
|
3 |
member |
University of Technology- Department of Materials Eng. |
Asset. Prof Dr. Sarmed Emad Ibrahem |
|
4 |
Member/supervisor |
University of Technology- Department of Materials Eng. |
Asset. Prof Dr. Farhad Othman Mahmood |
|
5 |
Member/supervisor |
University of Technology- Department of Materials Eng. |
Asset. Prof Dr. Alaa Alaa Aldeen. Abed Al-Hameed |
The thesis had been scenically evaluated by Assist. Prof. Dr. Ziena K. Abbas, Baghdad University/ Department Civil Engineering, and Linguistically by Assist. Prof. Dr. Samir A. Amen, University of Technology/ Department of Mechanical Engineering.
The discussion took place at higher studies hall / building C, and master degree had been granted to student.
The thesis discusses preparation nano materials by thermo-chemical spray method, where mono, and tri metallic oxides had been prepared, (zinc oxide, magnesium oxide, and aluminum oxide), from basic solutions with different molarity, (0.005, 0.1, 0.5), by spray at 750 Cº. The prepared powders had been tested by x-ray, Scanning electron microscope, particles size analyses, addition to densities which tested according to Archimedes theory. The prepared powders used to promote cement mortar characteristics, the base specimens was (1:2.75), cement to sand ratio. Nano powdersadded with different weight fraction, (1%, 2%, and 3%), at different particles sizes, (11.8،38.8،109.8) nm. The tests include viscosity and other: physical, thermal, and mechanical properties after (7) days.
The results show improving of properties for all specimens, consequently nano powders of these materials can be used to improve cement mortar used in external application like cover external walls of building and other external construction applications.
Students of the first stage, begun performing the finally exams of the first course of (2017-2018) academic year, in 11/2/2018. Assist Prof. Dr. Ahmed Mohammed Hasan,the dean of college,followed up the exams personally, to ensure of providing all necessary requirements to perform exams inside halls.
On 10/1/2018 2018 a seminar presented by Asst.Prof Dr. Mohamed Abdel-Hussein Mohamed Faculty staff at the Materials Engineering Department / University of Technology to participate in the TMREES Conference Series, to be held in early February in Beirut, Lebanon. (The use of the bubble column reactor and the CFD simulation for the polyethylene recycling of polyethylene terephthalate) was discussed. The research dealt with the use of the bubble column reactor and the natalite catalysis technology in the dismantling of polymerization of plastic water bottles and the production of polyethylene terephthalate monomer and its use in improving asphalt as a coating of concrete to increase mechanical and thermal resistance and cohesion Reduce water absorption.
On 22/1/2018 a Seminar was presented by Wafa Mahdi Saleh Teaching at the Materials Engineering Department / University of Technology Semner Scientific in order to participate in the scientific conference marked: (TMRESS Confrence Series) to be held in early February in Beirut - Lebanon. The study dealt with the effect of some mechanical properties of an overlapping material (polyester supported by various natural fibers - palm fiber, natural fiber, cecil plant and cannabis plant) and then treated I am chemically treated with NaOH by 10% and then comparing the results to the overlapping material with and without the chemical treatment of the fiber.
On 25/1/2018, the graduate student (master) Sara Abdel-Salam Hattab had discussed her thesis:(Polymer coating connector to reduce the risk of corrosion)The discussion committee consisted of the listed gentlemen
- Asst.Prof.Emad Saadi Abdulkareem University of technology\Department of Materials Engineering Head of committee
- Asst.Prof. Bissam Ibrahim Khalil University of technology\Department of Materials Engineering. Member
- Dr. Hussein Mohammed Yosef Ministry of Industry and Metals \ Member
- Prof. Rana Afif Anani University of technology\Department of Materials Engineering Supervisor
- Asst.Prof. Waf’a Mahdi Saleh University of technology\Department of Materials Engineering Supervisor
The thesis addressed the possibility of using both the inhibitors with the coating to obtain a thin and homogeneous coating layer of the non-pyrolymol polymer and with the amalgamation of organic and inorganic amines on carbon steel (St 44-2-DIN 17100) by electrochemical polymerization of the pyrolymol monomer and the possibility of improving corrosion resistance in the water medium Saline (3.5% sodium chloride) at different temperatures (293, 303, 313, 323 and 333)Kelvin. was studied,the structure and morphology of polymerized pyrolyle strata was studied using electron microscopy (SEM), AFM, FTIR spectroscopy and adhesion examination.
Scanning electron microscopy images showed the structure and morphology of the polypearol layer deposited on carbon steel. In general, the distribution of pyrolytes and saplings covers the surface on a regular basis. The variation of surface morphology is due to the composition of the cauliflower. While the images of the atomic force microscope showed the best growth of polypirol fibers, the morphology and roughness of the surface were also estimated from the atomic force microscope examination. Polysaccharides in organic anions cause little change in surface morphology. The polysaccharide polycrystalline polysaccharide is indicated
he results obtained from this study were shown by different corrosion-labeling techniques for carbon steels indicating the proposed insoluble polyol polyol for use as a conductive polymer and for optimal protection against erosion in seawater (3.5% NaCl solution). Prompt in industrial application, environmentally friendly and chemically stable
The thesis was evaluated scientifically by Prof. Dr.Awda Jabbar Breehi / University of Babylon / Faculty of Engineering and linguistics by AMD. Samir Ali Amin / University of Technology / Department of Mechanical Engineering.
The discussion was held at the Graduate Hall / Building C and the discussion committee was granted a Master's degree for the student.
More...
On 24/1/2018 the graduate student (Masters) Russul Salah Hadi discussed entitled her thesis entitled:
(Use of auxiliary materials in the chemical recycling of waste water bottles and their use in industrial applications)
The discussion committee consisted of the listed gentlemen
- Asst.Prof. Kadhem Mutter Shebeb Univesity of technology\Department of Materials Engineering Head of committee
- Asst.Prof, Saad Hanash Ammar University of Nahrain College of engineering. Member
- Asst.Prof. Mohammed Ramaid Gharkan Univesity of technology\Department of Materials Engineering Member
- Asst.Prof. Bissam Ibrahim Khalil Univesity of technology\Department of Materials Engineering Supervisor
- Asst.Prof. Kadhem Mohamed Abdul Hussein Univesity of technology\Department of Materials Engineering Supervisor
The study examined how mono meres were manufactured by recycling plastic water bottles using auxiliary materials using zinc oxide in two types (94.55) and with different weights (0.5,0.25,0.15 g) and using two types of nano-magnesium oxide and effective thinner with different weight ratios The use of a closed glass system at 190 ° C and the study of the effect of the ratio of the catalyst, the reaction time and the yield of the resulting material, and the analysis of the elements (carbon, hydrogen and nitrogen) ,The results showed that zinc oxide (55) was more productive and effective than the zinc oxide nanotubes (94) due to the large surface area of the nanotube zinc oxide (55) and reduced the reaction time to one hour instead of (7) hours and without the use of auxiliary materials using a simple closed system and economic costs
The thesis was evaluated scientifically by Prof.D.Kazem Kamel Rassen / University of Mustansiriya / Faculty of Engineering and linguistics by Prof. Dr. Akhtar Khallakal Hussein / University of Technology / Department of Mechanical Engineering.
The discussion was held at the Graduate Hall / Building C and the discussion committee was granted a Master's degree for the student.
Scientific seminars
On 8/1/2018, a group of teachers of the Materials Engineering Department / University of Technology has been working on scientific research to participate in the Tmress Confrence Series, to be held in early February in Beirut, Lebanon. The title of the first research presented by Asst.Prof.Dr. Ala’a Alla al-Din (Characteristics of Thin Films of SnO2 Deposited by Thermal Chemical Spraying Using Different Salt Solutions). In this Paper, the thermal chemical spraying method was used with one atomizer and two nozzle (SN, DN). The thin tin oxide membranes were formed in different structures. The tin oxide membranes were prepared at a concentration of 0.005M and their thickness was about 0.2 - 0.002 μm. Microscopic examination of the membranes, in addition to optical transparency and to the contact angle. The results showed that the membranes were crystallized with a four-angular structure with tiny micro-structures from plates to columns and clusters resembling cast.
The second research presented by Asst.Prof.Assel Basem (Natural fiber recycling and use in green cement mortar) to the process of manufacturing environmentally friendly cement mortar consisting of natural waste (coconut fiber, banana fiber, papyrus fiber, and palm fiber). Various additives (0 - 0.25 - 0.50-0.75-1 g) Natural waste (plant fiber) was the partial replacement of cement, mechanical properties and thermal conductivity. It was found that the increase of additives from natural waste increases the strength of the pressure and the hardness of cement mortar and the lack of thermal conductivity properties and water absorption. a To take advantage of these wastes and recycling instead of burning them.
Author of a scientific book
Al-Yamamah , Publishing and Distribution published a scientific book entitled "Transformations in Engineering Materials".Prof.Dr. Abbas Khamas Hussain Teaching in Materials Engineering / University of Technology. The third chapter deals with the process of synthesis. The fourth chapter focuses on the process of growth. Chapter 5 deals with the applications of transitions and ends with Chapter 6, which included a set of questions and questions.
Acknowledgments
- On 28/12/2017, the Head of Materials Engineering Department / Ahmed Mohamed Hassan Al-Ghabban on the book of thanks number 63 on 2/1/2018 by the President of the University of Technology Amin Douai Thamer Tomena for the efforts made and distinguished in the success of the specialized symposium tagged (Instructions for new scientific promotions No. 167 of 2017)
- On 19/12/2017 Prof. Dr.. Ali Hussein Ateey Teaching in the Department of Materials Engineering / University of Technology on the book of thanks and appreciation number 6656 on 19/12/2017 by Asst.Prof.Dr . Mohammed Said Abdul-Zahra, Dean of the Faculty of Medicine / University of Kufa in recognition of his great efforts and support to the Faculty of Medicine in the forums of the Council of the University of Kufa and his guidance in changing the curriculum and wish him success and success.
- On December 28, 2017, Asst.Prof Laith Qais Abbas rescived Aknowledgement number 67 on 2/1/2018 by the President of the University of Technology Amin Douai Thamer for the efforts made and distinguished in the success of the specialized symposium tagged (Instructions for new scientific promotions No. 167 of 2017.
