اخبار القسم en
A materials engineering student achieves third place in chess
Lydia Youssef Abd , materials engineering department student, places third in the chess competition for female students that held by the Student Activities Department at the University of Technology on Tuesday, October 17, 2023, in the sports hall, where the winner have been honored.
An awareness symposium
- The Department of Materials Engineering, in collaboration with the Center for Nanotechnology and Advanced Materials, hosted an awareness symposium titled “Enhancing National Heritage Identity” on Thursday, October 19, 2023. The symposium presented by Prof. Dr. Saad Badri Hassoun Farid and it was attended by the Department Head, Prof. Dr. Jawad Kazem Aliwi, and the Director of the Nanotechnology Center, Prof. Dr. Rana Afif Majeed. The symposium discussed heritage aspects include material, intellectual, artistic, creative, and linguistic heritage, in scientific, social, legal perspectives, and the relationship between them and the construction of the Iraqi character. The message conveyed by the symposium emphasized that the national character is constructed through an understanding and adoption of these building elements, not only limited to material heritage, but also on all the elements of the heritage mentioned above. At the end of the symposium, the scientific assistant of materials department expressed gratitude to the lecturer for the valuable presentation and presented a certificate of appreciation in recognition of their efforts.
Grant a doctorate degree
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student, Domoa Reyad Hussien, Department of Materials Engineering / University of Technology for her thesis titled
Synthesis and Structural Characterization of Novel Zirconium Metal-based MAX phases Zr2AX(A=AL, Sn & X = graphene Nano Sheet ) by pressureless sintering”
The discussion took place in the postgraduate hall located in Building B within the department on Sunday, 5/11/2023 at nine o'clock in the morning, and the discussion committee consisted of ladies and Gentlemen
- Prof. Dr. Muhammad Musleh Salman, Chairman
- Prof. Dr. Farhad Muhammad Al-Othman, member
- Asst.Prof.Dr. Kazem Matar Shabib, member
- Asst.Prof.Dr.Muhammad Abdel Hussein Muhammad, member
- Asst.Prof.Dr. Muhammad Jawad Kazem, member
- Prof. Dr. Ahmed Mohammed Hassan Al-Ghabban, Supervisor
- Asst.Prof.Dr.. Khaled Khudair Abbas,Supervisor
In addition, the thesis was scientifically evaluated by Prof Dr. Qusay Abdel Hamid/University of Technology/Department of Chemical Engineering, and Prof. Dr. Raouf Muhammad Raouf/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering, and linguistically by Asst.Prof.Dr. Laith Waddah Ismail/University of Technology/Department of Materials Engineering
After the examination committee recorded its comments on the thesis, which covered both explanation and correction, the student's defense of her thesis, and the conclusion of the discussion, the committee convened to evaluate the thesis. They decided to award the student a doctorate degree with a pass grade
Abstract
This study aims to prepare novel MAX phases with plausible purity using pressureless sintering and then study microstructure characteristics electrical properties and thermal conductivity of the MAX phase . The novelty of this research is to utilize graphite or single-layer nano-graphene sheet in the structure of the MAX phase including zirconium metal-based MAX phases Zr2AC (A = Aluminum, Tin). And the results The synthesized novel Zr2Al-GNS with purity 49.0 wt % and Zr2Sn-GNS MAX phase with purity 61.2 wt % at 1150 °C and 1300 °C, respectively.
Grant a doctorate degree
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student, Tamara Raad Kadhim , Department of Materials Engineering / University of Technology for her thesis titled
“Preparation and Characterization of Internal Bone Plate Fixation Made From Polymeric Bio Composites”
The discussion took place in the postgraduate hall located in Building B within the department on Thursday, 2/11/2023 at nine o'clock in the morning, and the discussion committee consisted of ladies and Gentlemen
Prof. Dr. Jumaa Salman Jiyad, President
Prof. Dr. Wafa Mahdi Saleh, member
Asst.prof.Dr. Jamal Jalal Daoud, member
Asst.prof.Dr.. Mayada Shanan Abd, member
Asst.prof.Dr.. Hassanein Ibrahim Khalaf, member
Prof. Dr. Jawad Kazem Aliwi, supervisor.
Prof. Dr. Qahtan Adnan Hamad, supervisor
In addition, the thesis was scientifically evaluated by Prof. Dr. Khaled Murshid Awaid/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering, and Prof. Dr. Auham Muhammad Hamid/University of Technology/Department of Applied Sciences, and linguistically by Asst.Prof.Dr. Laith Waddah Ismail/University of Technology/Department of Materials Engineering
After the examination committee recorded its comments on the thesis, which covered both explanation and correction, the student's defense of her thesis, and the conclusion of the discussion, the committee convened to evaluate the thesis. They decided to award the student a doctorate degree with a pass grade
Abstract:
The aim of this work was to fabricate two new types of ultrafiltration membranes (PVDF/MAXphase Ti3ALC2 and PVDF/TiO2-Ti3C2 MXene) and it was implemented by using the in situ modulation technique within phase inversion. In general, TiO2-Ti3C2 was incorporated into wood to reduce hydrophobicity and surface roughness. The distinctive properties invented by MXene were required, such as increased water permeability, effective dye rejection and anti-detection properties, so they proved it as an improved film and sealant material, and they achieved N5 The highest porosity and maximum flows of 538 h2L/m and 467.8 h2L/m (marine submarine and dye solution (EBT) on the toilet, where the hydrophilic N5 showed the highest affinity for Eriochrome black T (EBT) and flow recovery of 100%, which was vastly superior to the other film tested for it.
Grant a doctorate degree
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student, Tamara Wahid Abood , Department of Materials Engineering / University of Technology for her thesis titled
“Investigation of The Effect of Nano Additives on The Performance of Polymeric Membranes in Wastewater Treatment”
The discussion took place in the postgraduate hall located in Building C within the department on Thursday, 2/11/2023 at nine o'clock in the morning, and the discussion committee consisted of ladies and Gentlemen:
- Prof Dr. Alaa Abdel Hassan Attia, Chairman
- Prof. Dr. Ahmed Abdel Mohamed, member
- Prof. Dr. Khaled Turki Khaled, member
- Asst.Prof.Dr. Muhammad Osama Abbas, member
- Asst.Prof.Dr. Khaled Khudair Abbas, member
- Asst.Prof.Dr. Kazem Matar Shabib, supervisor
- Prof. Dr. Aseel Bassem Abdel Hussein, Supervisor
- Prof. Dr. Qusay Fadel Abdel Hamid, supervisor
In addition, the thesis was scientifically evaluated by Prof. Dr. Talib Muhammad Nayef / University of Babylon / Department of Chemical Engineering, and Asst.Prof.Dr. Imad Abdel Hussein Youssef/ Al-Nahrain University/ College of Science/ Department of Chemistry, and linguistically by Lect. Dr. Ali Abdul Karim Mohsen/University of Technology/Department of Materials Engineering
After the examination committee recorded its comments on the thesis, which covered both explanation and correction, the student's defense of her thesis, and the conclusion of the discussion, the committee convened to evaluate the thesis. They decided to award the student a doctorate degree with a pass grade
Abstract:
Introduce a new biocomposite materials. Consist of biopolymer matrix UHMWPE reinforced with nano particles. Of Hydroxylapatite and titanium dioxide and carbon and Kevlar fiber with different weight fraction.Investigate mechanical physical, and biological properties to inspect suitable properties for this application .design femure bone model to present total deformation and stress analysis numerically.The result showed that increased properties with weight fraction and can be used as implant in human body because of antibacterial inhibition and cell availability and idetincal the experiment result with numerical.
PhD degree
The Department of Materials Engineering at the University of Technology awarded a PhD degree to the student, Wassan Suhail Hussein, Department of Materials Engineering / University of Technology for her thesis titled
“Experimental and Numerical Analysis of Polymeric composite Material for Biomedical Application”
The discussion took place in the postgraduate hall located in Building B within the department on Thursday, 25/10/2023 at nine o'clock in the morning, and the discussion committee consisted of ladies and Gentlemen
Prof. Dr. Abbas Khamas Hussein , Chairman
Asst. Prof. Dr. Khalid murshid Owed, member
Asst Prof. Dr. Kadhim Matar Shabib, member
Asst. Prof. Dr. Sarmad Emad Ebrahim, member
Prof. Dr. Qahtan Adnan Hamad, as a member and supervisor
Prof. Dr. Jawad Kadhim Olaiwi, as a member and supervisor
In addition, the thesis was scientifically evaluated by Prof. Dr. Ahmed Fadhil hamza/ University of Babylon/ College of Materials Engineering and Prof. Dr. Adnan Abduljabar Abdulrazaq /University of Technology/Department of Chemical Engineering, and linguistically by Asst. prof. Dr. Laith Wadah Ismaiel/ University of Technology/Department of Materials Engineering.
After the examination committee recorded its comments on the thesis, which covered both explanation and correction, the student's defense of her thesis, and the conclusion of the discussion, the committee convened to evaluate the thesis. They decided to award the student a PhD degree with a pass grade
Abstract:
This study aimed to improve properties of PMMA resin denture base by blending it with polyamide (PA) type (6) and polyvinylpyrrolidone (PVP) type (K30) and reinforced by sisal and coconut natural powders. Samples were analyzed experimentaly and numerically. Mechanical, physical, miscibility and morphological tests were conducted in this study. Results obtained the most properties value improved when the weight fraction of blends and reinforcing particles increased. The experimental results were in agreement with the numerical results of the finite element analysis.
Teaching staff from the Department of Materials Engineering win second and third places in the university table tennis championship
Teaching staff from the Department of Materials Engineering win second and third places in the university table tennis championship
Assist. Prof. Dr. Kazem Matar Shabib, Lect. Dr. Ali Abdul Karim Mohsen, Department of Materials Engineering, won the second and third places, respectively, in the University of Technology table tennis competition for teaching staff, which was held by the Student Activities Department on Wednesday and Thursday, 18-19/10/2023, in the table tennis hall.
Two students from the Department of Materials Engineering participate in the University of Baghdad Marathon
On Sunday, 10/15/2023, the students, Shukran Mudar Ahmed and Lydia Youssef Abd, Department of Materials Engineering, participated in the University of Baghdad Marathon, which was held at the stadiums of Baghdad University.
Participation as a lecturer in a training course
A teaching staff in the Materials Engineering Department (Prof. Dr. Alaa Alaa El-Din Abdel Hamid) participated as a lecturer in the training course entitled: “Inspecting and treating concrete in oil and industrial facilities and in dam applications,” which was held for the period from 7-17-2022 to 7-21-2022.
On Monday, May 2, 2022, Ms. Iman Kazem Hamza, Rapporteur of the Student Affairs Committee, met with a number of male and female students for the second stage to find out their academic conditions in general and overcome the difficulties they may face in taking exams.
More...
Mrs. Dr. Lama Akram Jello,published her research labeled:
Effects of healthy psychological course
In Journal of Population Therapeutics & Clinical Pharmacology
Abstract:
The aim of this research is to prepare a healthy psychological course and study its impact on the levels of
serum uric acid (SUA) and pessimism and depression. The research sample was limited to teaching staff
of the Iraqi State Universities in Baghdad, who were retired at 63–65 years of age. Data were collected by
independent group experimental approach via pre- and posttest measurements. The study sample consisted
of 21 people with cases of pessimism and depression. The sample was randomly chosen based on their consent
to do pre- and posttests and to be subjected to healthy psychological approach. After collecting the data
obtained from the samples and processing them statistically, the results showed that the healthy psychological
course had a positive effect on the levels of SUA, pessimism, and depression of the research sample.
A teacher from the Materials Engineering Department participates in the Sixth Patents and Industrial Models Exhibition of the Ministry of Industry and Minerals (2023)
Asst. Lect. Nizar Jabbar Abdel Redha, a Faculty member in the Department of Materials Engineering at the University of Technology, at the Sixth Patents and Industrial Models Exhibition of the Ministry of Industry and Minerals (2023), which was held by the Industrial Research and Development Authority of the Ministry of Industry and Minerals on 9/12/2023 with the patent tagged
“Producing silicon nanosheets (silicin) and adding them to artificial bone grafts.”
"PRODUCTION OF SILICON NANO-SHEETS (SILICENE) FOR ENHANCING THE BIOCERAMICS"
More than 180 patents and 50 industrial models participated in the exhibition
The Shield of Excellence was obtained for the participating patent.
Names of inventors
Prof. Dr. Ahmed Muhammad Hassan Al-Ghabban/University of Technology/President of the University
Asst.Prof. Dr.. Anwar Juma Ahmed Al-Obaidi/Wasit University/Faculty of Engineering/Department of Mechanical Engineering
Asst.Lect Nizar jabbar Abdel Reda/University of Technology/Department of Materials Engineering.
The current work aims to produce bioceramics composites reinforced with novelty nanostructured fillers that may be a turning point for bioceramics.
The choice of silicene came because of its unique properties and is considered the next generation after graphene.
Hydroxyapatite and Tri-calcium phosphate were selected as vital basic materials as a starting point in this work. A number of composite materials were synthesized as a result of the synthesis of these two materials at rates. As well as the reinforcement of the base materials individually and composite with silicene fillers percentage (1, 3, 5) %.
Powder technology is the method adopted for preparing samples for Mechanical ,Physical, Biological tests as well as composition (XRD, SEM) as two tests analysis the general behaviour of the materials produced in this work.
The results showed the positive effect of adding silicene on the general properties of the base and composite materials, as well as obtaining unique cases by involving more than one property that improves, as well as the absence of all the materials used from the toxic effect.
Professor Dr. Abbas Khammas, a lecturer in the Materials Engineering Department at the University of Technology, Has authored a book titled:
"Basics of Engineering Materials Selection"
Abstract:
In this book, the selection of engineering materials is treated through four main steps including, translation of design requirements, screening of candidates according to constraints, ranking according to objectives and supporting information of final candidates
The Department of Materials Engineering at the University of Technology awarded a master's degree to the student, Duaa Sabah Shames , Department of Materials Engineering / University of Technology for her thesis titled.
"Fabrication and characterization of Multifunctional Coating on Stainless Steel Implan
Whereas, the discussion took place in the postgraduate hall in Building B in the department on Tuesday, 3/8/2023 at nine o'clock in the morning, and the discussion committee consisted of ladies and Gentlemen
- Dr.Farhad Mohamed Othman , Chairman Prof. Dr. Mahdi Qasim Zaier , member
- Dr. Shaymaa Salah Mahdi , member
- Asst. Prof. Dr. Hana’a Areer Semej , as a Supervisor
- Prof. Dr. Mojhaned Najah Jawad , as a Supervisor
In addition to scientifically evaluating the dissertation by Prof. Dr. Enas Huhi Hadi Mustafa/ University of Technology/ Department of Applied Science Engineering, and asst. Prof. Dr. Issra Qahtan Sabri / University of Babylon/ College of Materials Engineering, and linguistically by a Lect.. Dr. Ali Abdulkareem Muhsin / University of Technology/ Department of Materials Engineering
After the discussion committee recorded its observations on the thesis, which were in between explanation and correction, the student's defense of her thesis, and the end of the discussion, the committee decided to evaluate the thesis, and decided to grant the student a master's degree with a Pass Grade
Abstract:
The study aims to improve the osseointegration of 316L stainless steel while maintaining its good mechanical properties, by applying a modified hybrid coating layer of a PMMA-based compound with different amounts of silver NP and biologically active ceramic particles as reinforcing materials on 316L stainless steel by depositing a bonding coating layer by the electroless AgNP method and top coating by electrostatic spray deposition (ESD) with different ratios of (PMMA and NiO). The coating process was successful with multiple layers on the 316L stainless steel substrate and the resistance to corrosion.