Jawad K. Oleiwi

Cinque Terre

Jawad K. Oleiwi

Materials Engineering Department

Assist Professor

This email address is being protected from spambots. You need JavaScript enabled to view it.

Jawad K. Oleiwi, Faculty member of Materials Engineering Department / University of Technology, Baghdad / Iraq. His field research interests are composite materials, biomaterials, implants, prosthetic materials and mechanical tests.
He has more than 75 published papers in national and international journals and conferences and has three patents in field of composite materials. Dr. Jawad is member of Iraqi union of Engineers since 1990.

Google Scholar Profile

Researcgate Profile

Publons Profile

ORCID iD

scopus

Ph.D., Mechanical Engineering, University of Technology, Iraq, 2002

M.Sc., Mechanical Engineering, University of Technology, Iraq, 1995.

B.Sc., Mechanical Engineering, University of Technology, Iraq, 1990.

composite materials, biomaterials, implants, prosthetic materials and mechanical tests, F.E.M., ANSYS.

1-) Buckling Analysis of the Composite Column by Using Finite Element Method and Experimental method.
2-) Experimental Study of the Flexural Strength of the Laminate Composite Material.
3-) Buckling Analysis of Unidirectional Polymer Matrix Composite Plates.
4-) Effect of (Al2O3) on the Flexural Analysis of Polymer Matrix Composite Reinforced by Unidirectional Glass Fiber.
5-) Study the Thermal Characteristics of a Composite Specimen by using finite element method and experimentally.
6-) Design of a dynamometer for High Power engines.
7-) A Study of Wear Rate Behavior of Polyester Reinforced by Silica (SiO2) Particles
8-) A Study the Hardness and Wear Rate of Elastomer Composites Reinforced by Al2O3 and SiO2 Particles.
9-) Improving the properties of the Tire Tread by Adding SiO2 and Al2O3 to SBR Rubber.
10-) A Study of the Effect of Carbon Black Powder on the Physical Properties of SBR/NR Blends Used in Passenger Tire Treads.
11-) Studies of the Effect of Carbon Black Particles on the Mechanical Properties of SBR/NR Blends Used in Passenger Tire Treads.
12-) Effect of Reinforcement Material on Fatigue Characteristics of Trans-Tibial Prosthetic socket with PMMA Matrix.
13-) Tensile and Fatigue Characteristics of Lower-Limb Prosthetic Made from Composite Materials.
14-) Improving Mechanical and Fatigue Characteristics of Trans-Tibial Prosthetic socket.
15-) Tensile and buckling analysis of polymeric composite columns.
16-) Experimental Investigation and Mathematical Modeling of Tensile Properties of Unsaturated Polyester Reinforced by Woven Glass Fibers.
17-) A Study of Mechanical Properties of Polymethlmethacrylate polymer reinforced by silica particles (SiO2).
18-) Modeling and Buckling analysis of polymeric Composites columns.
19-) Study the Tensile Characteristics of Elastomer Composites Reinforced with Alumina and Precipitated Silica Particles.
20-) Biomechanics of Natural Fiber Green Composites as Internal Bone Plate Grafted.
21-) Tensile and Fracture Properties of Coir Fiber Green Composites Bone Plate Fixation.
22-) Tensile Properties Distribution of Coir Natural Fiber Using Weibull Statistics.
23-) Design of Prosthetic Foot from Polymer Materials Reinforced by Carbon Fibers.
24-) Improve Flexural Strength of PMMA/SR Polymer Blend by Reinforcement with Carbon Fibers as Prosthetic Foot Polymer Material.
25-) Improving Tensile Strength of Polymer Blends as Prosthetic Foot Material Reinforcement by carbon Fiber.
26-) Comparative Study the Flexural Properties and Impact Strength For PMMA Reinforced by Particles And Fibers For Prosthetic Complete Denture Base.
27-) Investigation of Fatigue and Compression Strength for the PMMA Reinforced by Different System for Denture Applications.
28-) Numerically and Experimentally Studying of Some Mechanical Properties of the Polyester Matrix Composite Material Reinforced by Jute Fibers.
29-) Numerically and Theoretically Studying of the Upper Composite Complete Prosthetic Denture.
30-) Studying the Tensile Properties and Morphology Test for the Self Cured PMMA Resin of Prosthetic Complete Denture.
31-) Physical and Mechanical Properties Estimation of Ti/HAP Functionally Graded Material Using Artificial Neural Network.
32-) Fabrication, characterization and Physical Properties of Functionally Graded Ti/HAP bioimplants.
33-) Microhardness And Compressive Strength of Functionally Graded Ti/HA Biomaterials.
34-) Comparing Effect of Adding LDPE, PP, PMMA on The Mechanical Properties of Polystyrene (PS).
35-) Evaluation of addition ABS and EPDM effect on the mechanical properties of ternary polymer blends.
36-) Studying the Tensile and Buckling for PMMA Reinforced by Jute Fibers for Prosthetic Pylon.
37-) Experimental and Numerical Analysis of Bulletproof Armor made from Polymer Composite Materials.
38-) Study the Effect of Iron Powder Additives on Mechanical properties of Recycling of Aluminum Cans Scrap.
39-) Studying the Tensile and Buckling for PMMA Reinforced by Jute Fibers for Prosthetic Pylon.
40-) Tensile and Buckling of Prosthetic Pylon Made from Hybrid Composite Materials.
41-) Effect of Water Absorption on the Compressive Strength for PMMA Nano Composite40-) Tensile and Buckling of Prosthetic Pylon Made from Hybrid Composite Materials. s and PMMA Hybrids Nano Composites Reinforced by Different Nanoparticles Used in Dental Applications.
42-) Investigation of Hardness and Flexural Properties of PMMA Nano Composites and PMMA Hybrids Nano Composites Reinforced by Different Nano Particles Materials used in Dental Applications.
43-) Flexural and Impact Properties of PMMA Nano Composites and PMMA Hybrids Nano Composites Used In Dental Applications.
44-) Effect of Accelerated Weathering on the Compressive Strength for PMMA Nano Composites and PMMA Hybrids Nano Composites Used in Dental Applications.
45-) Effect of Siwak and Bamboo Fibers on Tensile Properties of Self-Cure Acrylic Resin Used for Denture Applications.
46-) Preparation and Investigation of some Properties of Acrylic Resin Reinforced with Siwak Fiber Used for Denture Base Applications.
47-) Studying the Flexural Properties and Max. Shear Stress of Self Cure PMMA Resin for Denture Applications.
48-) Experimental and Numerical Investigation of Lower limb Prosthetic Foot Made from Composite Polymer Blends.
49-) Study Compression and Impact Properties of PMMA Reinforced by Natural Fibers Used in Denture.
50-) Water Absorption and Thermal Properties of PMMA Reinforced by Natural Fibers for Denture Applications.
51-) Comparative Study of Some Mechanical Properties of Hybrid Polymeric Composites Prepared by using Friction Stir Processing.
52-) Investigation of Flexural Strength and Impact Strength of Binary Polymer Blends Fabricated by Friction Stir Processing.
53-) Study Some Mechanical Properties of Binary Polymer Blends Fabricated by Friction Stir Processing.
54-) Investigation of mechanical properties of PMMA composite reinforced with different types of natural powders.
55-) Thermal Properties of polymeric Composites reinforced by Nano ceramic materials.
56-) Experimental Investigation of Flexural and Impact Properties of PMMA Reinforced by Bamboo and Rice Husk Powders.
57-) Tensile Properties and Morphological Test of Heat Cured Acrylic Resin Reinforced by Natural Powders.
58-) Study the Mechanical Properties of Polymeric Blends (SR/PMMA) Using for Maxillofacial Prosthesis Application.
59-) Study Some Physical Properties of Polymeric Blends (SR/ PMMA).
60-) Compression and Hardness with FTIR Characterization of UHMWPE Nanocomposites as Acetabular Cup in Hip Joint Replacement.
61-) CNTs and nHA as Reinforcement to Improve Flexural and Impact Properties of UHMWPE Nanocomposites for Hip Joint Applications.
62-) Roughness, wear and thermal analysis of UHMWPE Nanocomposites as Acetabular Cup in Hip Joint Replacement.
63-) Preparation and Characterization of Carbon Nanotubes using Carbon Black by Electrochemical Technique with Anodic Aluminium Oxide.
64-) Studying the Mechanical Properties of Denture Base Materials Fabricated from Polymer Composite Materials.
65-) Investigation the Properties of Silicone Rubber Blend Reinforced by Natural Nanoparticles and UHMWPE fiber.
66-) Some Mechanical Properties of Polymer Matrix Composites Reinforced by Nano Silica Particles and Glass Fibers.
67-) Study Thermal Behavior of Heat Cure Poly (Methyl Methacrylate) Reinforced by Bamboo and Rice Husk Powders for Denture Applications.
68-) Modification of Silicone Rubber by Added PMMA and Natural Nnatural Nanoparticles Used for Maxillofacial Prosthesis Applications.
69-) Studying the Effect of Natural Bamboo and Rice Husk Powders on Compressive Strength and Hardness of Acrylic Resin.
70-) A Comparative Study to the Wear Behavior of Epoxy Reinforced by TiO2 and Al2O3 Nanoparticles
71-) Tensile Properties of UHMWPE Nanocomposites Reinforced by CNTs and nHA for Acetabular Cup in Hip Joint Replacement.
72-) Nanomechanical Characterization and Tensile Test of Polymer nanocomposites for Bioimplants.
73-) The effect of annealing on the behavior of polyetheretherketone composites compared to pure titanium.
74-) Study Compression, Hardness and Density properties of PMMA Reinforced by Natural Powder Used in Denture Base applications.
75-) Influence of Pistachio Shell Powder Reinforcement on FTIR and DSC Behavior of PMMA Acrylic Resin.
76-) Tensile and morphological properties of PMMA composite reinforced by Pistachio Shell powder used in denture applications.
77-) Evaluation of some properties of polyetheretherketone composites used for biomedical applications.
78-) Low velocity impact of Kevlar and ultra high molecular weight polyethylene (UHMWPE) reinforced epoxy composites.

composite materials

biomaterials

Numerical and Engineering Analysis

Patents 1-) Novel Recipe to Develop the Performance of Tire Tread by Adding Fine Ceramics Powder. 2-) Fabrication of Biocomposites as alternatives for corroded metallic materials which used in Dental Implantation. 3-) Fabrication of Polymeric Composites with Nano Additives as Artificial Acetabular Cup for Artificial Hip Joint and Studying Tribocorrosion by Special System.

Top