Emad S. Al-Hassani was born in Baghdad, Iraq in August of 1969. He received his B.Sc and M.Sc degrees in 1995 and 1998 respectively from University of Technology , Iraq. From 2004- 2007, he joined a PhD study at the Faculty of Production Engineering and Metallurgy. Baghdad, Iraq. Since 2002.
He has been a Prof. of Materials Eng. at the UOT, Iraq. Starting scientific publishing since 2007, he has more than 50 publications in national and international conferences and journals.

Google Scholar Profile

Researcgate Profile

Publons Profile

ORCID iD

scopus

Ph.D., Metallurgy Engineering, University of Technology, Iraq, 2007.

M.Sc., Metallurgy Engineering, University of Technology, Iraq, 1998.

B.Sc., Production Engineering and Metallurgy, University of Technology, Iraq, 1995.

Metallurgy Engineering, Smart Materials, Biomaterials, Composite .

• Friction Welding of Austenitic Stainless Steel 316L with different Types of Copper .(Technical Journal, accepted, 8/11/2001)
• Friction Welding for Austenitic Stainless Steel 316L with Aluminum Alloy 5164. (Engineering &Technology Journal, accepted, 1/11/2001).
• Study of wear resistance of (Zn 12) alloys prepared by vibrational casting. (10th Scientific Conference for Foundation of Technical Education – Baghdad)
• Study of Tensile Strength and Hardness Property for Epoxy Reinforced With Glass Fiber Layers Emad S. Al-Hasani Eng. & Technology, Vol.25, No.8, 2007
• Effect of Chemical Solutions on Mechanical Properties of Epoxy Composite Reinforced With Glass Fibers Emad S. Al-Hasani Eng. & Tech. Journal, Vol.28, No.9, 2010
• Effect of Different Chemical Solution On Tensile Strength of Polymer Composite Dr. Emad S. AL-Hassani & Sheelan R. Areef o Eng. & Tech. Journal, Vol.28 , No.4 , 2010
• Effect of Uv Radiation on Dielectric Constant And Thermal Conductivity In Epoxy Phenol Blends Dr. Emad S. AL-Hassani 2010 Eng. & Tech. Journal, Vol.28, No.10, 2010
• The Effect of Fiber Orientation on Creep Behavior And Flextural Strength In Epoxy Composites Dr. Emad S. AL-Hassani & Sheelan R. Areef Eng. & Tech. Journal, Vol.28, No.7, 2010 2011
• Corrosion Behavior of Copper-Steel Particulate Composite J. T. AL-Haidary, Emad S. AL-Hassani, Sheelan R. Areef Modern Applied Science Vol. 5, No. 3; June 2011 2013
• Characterization of Ni–Ti shape memory alloys prepared by powder metallurgy Adnan S. Jabur , Jafar T. Al-Haidary , Emad S. Al-Hasani Journal of Alloys and Compounds 578 (2013) 136–142
• Finite element analysis using mat lab of oxidation kinetics in air of steel-t21 alloy coated by simultaneous germanium-doped aluminizing-siliconizing process. ABBAS KHAMMAS HUSSEIN, LAITH KAIS ABBAS AND EMAD SAADI AL-HASSANI (International J. of Engg. Research & Indu. Appls. (IJERIA). ISSN 0974- 1518, Vol.6, No. II (May 2013), pp 83-93)
• Characterization of NiTi Superelasticity Shape Memory Alloys. (Engineering &Technology Journal, Vol.31, part(A) , No.16 , 2013) 2014
• Experimental Investigation and Mathematical Modeling of Tensile Properties of Unsaturated Polyester Reinforced by Woven Glass Fibers Dr. Jawad Kadhim Oleiwi, Dr. Emad Saadi Al- Hassani, Alaa Abd Mohammed Eng. & Tech. Journal , Vol.32,Part (A), No.3, 2014
• Modeling and Buckling Analysis of Polymeric Composite Columms. Dr. Jawad Kadhim Oleiwi, Dr. Emad Saadi Al- Hassani, Alaa Abd Mohammed (Engineering &Technology Journal, Vol.32 , part (A) No. 5,2014)
• Tensile and Buckling Analysis of Polymeric Composite Columns Dr. Jawad Kadhim Oleiwi, Dr. Emad Saadi Al- Hassani, Alaa Abd Mohammed Basrah Journal for Engineering Sciences, vol. 14, no. 2, 2014
• Erosion Wear Behavior of Glass Fiber Reinforced Epoxy Resin and its Coating with Natural based Materials (2014) Aseel Basim Abdul-Hussein, Imad Saad Al-Hasani, Reem Alaa Mohamed المؤتمر الدولي الأول لتطبيقاث الليزر والمواد المتقدمت(للفترة ١٦-١٨-/١٢/٢٠١٤)
• Effect of industrial powder on mechanical properties of glass fiber reinforced epoxy composite Aseel Basim Abdul-Hussein, Imad Saad Al-Hasani, Reem Alaa Mohamed (Iraqi Journal of Physics Vol.12 ,No. 25,2014 ,pp. 8-24)
• Effect of Alloying Elements (Mo and Al) on Biomaterials Ti-Ta Shape Memory Alloys. Dr. Sahib M. Al-Saffar , Dr. Emad S. Al-Hassani, Fatima J. Al-Hassani (Engineering &Technology Journal, Vol.32 , part (A) No. 4,2014) 2015
• Influence of coating with some natural based materials on the erosion wear behavior of glass fiber reinforced epoxy resin Aseel Basim Abdul-Hussein, Emad Saad Al-Hasani, Reem Alaa Mohamed (Al-Khwarizmi journal of engineering) Vol.11, No.2, pp.20-30 (2015)
• Erosion wear behavior of industrial material reinforced epoxy resin and its coating with natural based material Aseel Basim Abdul-Hussein, Emad Saad Al-Hasani, Reem Alaa Mohamed (Engineering &Technology Journal, Vol. 33 , part (A) No. 4, 2015, p.p 902-919
• Effect of Nature Materials Powders on Mechanical and Physical Properties of Glass Fiber / Epoxy Composite. Aseel Basim Abdul-Hussein, Emad Saad Al-Hasani, Reem Alaa Mohamed (Engineering &Technology Journal, Vol.33, part (A) No.1, 2015, pp 175-197 ) 2016
• Mechanical and physical properties of carbon nano tubes with kevlar fiber reinforced with polyester resin Aseel Basim Abdul-Hussein, Emad Saadi AL-Hassani, Marwa Subhi Atallah Iraqi Journal of Physics, 2016 Vol.14, No.31, PP. 71-80
• Preparation and Characterization of Biomedical Ni-Co-Al Shape Memory Alloys Dr. Emad S. Al-Hassani, Dr. Sahib M. Al-Saffar, Zena Abdul Ameer Eng. &Tech.Journal, Vol.34,Part (A), No.7,2016
• Welding Repair of Blade Steam Turbine By Inconel-82 and Investigation Diffusion Elements Along Weldments Dr. Fadel A. Hashim, Dr. Emad S. Al-Hassani, Dr.Abbas K. Al-Saadi, Olaa H. Ali ADVANCES in NATURAL and APPLIED SCIENCES 2016 December10(17):pages 168-185
• Effect of (Ta &Nb) on Corrosion Behavior of Nitinol Alloys Dr. Emad S. Al-Hassani (Eng. &Tech. Journal, Vol.34,Part (A), No.9 , 2016)
• Effect of Cr Addition on Ti-Base Shape Memory Implant Dr. Emad S. Al-Hassani (The Iraqi Journal for Mechanical and Materials Engineering , Vol.16, No.1, 2016)2017
• Welding procedures of Turbine Blades by Using ER 309L Austenitic Filler Wire Fadhil Abbas Hashim, Emad S. Al-Hassani, Abbas K. Husain, Olaa Husain Ali Engineering and Technology Journal Vol. 35, Part A, No. 1, 2017
• Mechanical and Physical Properties of Nano Carbon Tube with Carbon Fiber Reinforced with Polyester Resin Aseel Basim Abdul-Hussein, Emad Saadi AL-Hassani, Marwa Subhi Atallah Engineering and Technology Journal, Vol. 35, Part A, No. 5, pp. 465-472, 2017.
• Effect of ultrasound surface activation on the surface roughness of titanium dental implants Dr.Emad S. Al-Hassani and & Fatima J. Al-Hassani ADVANCES in NATURAL and APPLIED SCIENCES 2017 August 11(10): pages 12-19
• Evaluation of Stem Cells’ Growth on Electrospun Polycaprolactone (PCL) Scaffolds Used for Soft Tissue Applications Akram R. Jabur a, Emad S. Al- Hassani , Ahmed M. Al- Shammari , Manar A. Najim , Aymen A. Hassan , Aesar A. Ahmed \ScienceDirect ,Energy Procedia 119(2107) 61–71)
• Investigation of Corrosion Behavior for Copper-Based Shape Memory Alloys in different Media Dr.Emad S. Al-Hassani, Alaa Hasan Ali, Sara Talal Hatem Engineering and Technology Journal, Vol. 35, Part A, No. 6, pp. 578-586, 2017.
• Investigation of the Ion Release from Titanium Implant Surface Treated by Nd - YAG Laser Dr. Emad S. Al-Hassani and Fatima J. Al-Hassani ADVANCES in NATURAL and APPLIED SCIENCES 2017 July 11(9): pages 257-267
• Effect of Dual Surface Activation on the Surface Roughness of Titanium Dental Implant Dr. Emad S. Al-Hassani, Fatima J. Al-Hassani Journal of Natural Sciences Research ,Vol.7, No.14, 2017 2018
• Effect of Nano Carbon Tube on the Mechanical and Physical Properties of Composites Based on Resin Route Aseel Basim Abdul-Hussein, Emad Saadi AL-Hassani, Marwa Subhi Atallah Engineering and Technology Journal, Vol. 36, Part A, No.4, 2018
• Effect of polymer coating on the osseointegration of CP-Ti dental implant Emad Al-Hassani, Fatima Al-Hassani, and Manar Najim Citation: AIP Conference Proceedings 1968, 030022 (2018); doi: 10.1063/1.5039209
• Investigation of Microstructure and Chemical Analysis Along Weldments AISI 410 MSS/ER Nicrmo-3 Emad S. Al-Hassani Engineering and Technology Journal Vol. 36, Part A, No. 5, 2018 2019
• Effect of laser pulses on ion release behavior of Ti-base alloys Emad S. Al-Hassani Cite as: AIP Conference Proceedings 2190, 020030 (2019); https://doi.org/10.1063/1.5138516 Published Online: 11 December 2019
• The nanomechanical characterization and tensile test of polymer nanocomposites for bioimplants AlaaA. Mohammed, Emad S. Al-Hassani, and Jawad K. Oleiwi AIP Conference Proceedings 21123, 020065 (2019); https://doi.org/10.1063/1.5116992 Published Online: 17 July 2019
• Evaluation of some properties of polyetheretherketone composites used for biomedical applications A. A. Mohammed, Emad. S. Al-Hassani and J. K. Oleiwi IOP Conf. Series: Materials Science and Engineering 757 (2020) 012044 doi:10.1088/1757-899X/757/1/012044
• The effect of annealing on the behavior of polyetheretherketone composites compared to pure titanium AlaaAMohammed ,EmadSAl-Hassani,JawadKOleiwi and Seyed R Ghaffarian Mater. Res. Express 6 (2019) 125405
• EFFECT OF AG ADDITION ON CP-TI DENTAL IMPLANT Wehad A. Al-Rawy 1, a) and Emad S. Al-Hassani2, b)Cite as: AIP Conference Proceedings 2190, 020017 (2019); https://doi.org/10.1063/1.5138503 Published Online: 11 December 2019
• Effect of Adding Silver Element and Zirconia Ceramic on Corrosion Behavior and Mechanical Properties of Pure Titanium Wehad A. Al-Rawy , Emad S. Al-Hassani Engineering and Technology Journal Part A, 2019
• Corrosion Behavior and Mechanical Properties of Some Addition on Pure Titanium Wehad A. Al-Rawy , Emad S. Al-Hassani
• Preparation and Physical Properties of PCL-Metoprolol Tartrate Electospun Nanofibers as Drug Delivery System