Grant a doctorate degree
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student, Domoa Reyad Hussien, Department of Materials Engineering / University of Technology for her thesis titled
Synthesis and Structural Characterization of Novel Zirconium Metal-based MAX phases Zr2AX(A=AL, Sn & X = graphene Nano Sheet ) by pressureless sintering”
The discussion took place in the postgraduate hall located in Building B within the department on Sunday, 5/11/2023 at nine o'clock in the morning, and the discussion committee consisted of ladies and Gentlemen
- Prof. Dr. Muhammad Musleh Salman, Chairman
- Prof. Dr. Farhad Muhammad Al-Othman, member
- Asst.Prof.Dr. Kazem Matar Shabib, member
- Asst.Prof.Dr.Muhammad Abdel Hussein Muhammad, member
- Asst.Prof.Dr. Muhammad Jawad Kazem, member
- Prof. Dr. Ahmed Mohammed Hassan Al-Ghabban, Supervisor
- Asst.Prof.Dr.. Khaled Khudair Abbas,Supervisor
In addition, the thesis was scientifically evaluated by Prof Dr. Qusay Abdel Hamid/University of Technology/Department of Chemical Engineering, and Prof. Dr. Raouf Muhammad Raouf/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering, and linguistically by Asst.Prof.Dr. Laith Waddah Ismail/University of Technology/Department of Materials Engineering
After the examination committee recorded its comments on the thesis, which covered both explanation and correction, the student's defense of her thesis, and the conclusion of the discussion, the committee convened to evaluate the thesis. They decided to award the student a doctorate degree with a pass grade
Abstract
This study aims to prepare novel MAX phases with plausible purity using pressureless sintering and then study microstructure characteristics electrical properties and thermal conductivity of the MAX phase . The novelty of this research is to utilize graphite or single-layer nano-graphene sheet in the structure of the MAX phase including zirconium metal-based MAX phases Zr2AC (A = Aluminum, Tin). And the results The synthesized novel Zr2Al-GNS with purity 49.0 wt % and Zr2Sn-GNS MAX phase with purity 61.2 wt % at 1150 °C and 1300 °C, respectively.
Grant a doctorate degree
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student, Tamara Raad Kadhim , Department of Materials Engineering / University of Technology for her thesis titled
“Preparation and Characterization of Internal Bone Plate Fixation Made From Polymeric Bio Composites”
The discussion took place in the postgraduate hall located in Building B within the department on Thursday, 2/11/2023 at nine o'clock in the morning, and the discussion committee consisted of ladies and Gentlemen
Prof. Dr. Jumaa Salman Jiyad, President
Prof. Dr. Wafa Mahdi Saleh, member
Asst.prof.Dr. Jamal Jalal Daoud, member
Asst.prof.Dr.. Mayada Shanan Abd, member
Asst.prof.Dr.. Hassanein Ibrahim Khalaf, member
Prof. Dr. Jawad Kazem Aliwi, supervisor.
Prof. Dr. Qahtan Adnan Hamad, supervisor
In addition, the thesis was scientifically evaluated by Prof. Dr. Khaled Murshid Awaid/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering, and Prof. Dr. Auham Muhammad Hamid/University of Technology/Department of Applied Sciences, and linguistically by Asst.Prof.Dr. Laith Waddah Ismail/University of Technology/Department of Materials Engineering
After the examination committee recorded its comments on the thesis, which covered both explanation and correction, the student's defense of her thesis, and the conclusion of the discussion, the committee convened to evaluate the thesis. They decided to award the student a doctorate degree with a pass grade
Abstract:
The aim of this work was to fabricate two new types of ultrafiltration membranes (PVDF/MAXphase Ti3ALC2 and PVDF/TiO2-Ti3C2 MXene) and it was implemented by using the in situ modulation technique within phase inversion. In general, TiO2-Ti3C2 was incorporated into wood to reduce hydrophobicity and surface roughness. The distinctive properties invented by MXene were required, such as increased water permeability, effective dye rejection and anti-detection properties, so they proved it as an improved film and sealant material, and they achieved N5 The highest porosity and maximum flows of 538 h2L/m and 467.8 h2L/m (marine submarine and dye solution (EBT) on the toilet, where the hydrophilic N5 showed the highest affinity for Eriochrome black T (EBT) and flow recovery of 100%, which was vastly superior to the other film tested for it.
Grant a doctorate degree
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student, Tamara Wahid Abood , Department of Materials Engineering / University of Technology for her thesis titled
“Investigation of The Effect of Nano Additives on The Performance of Polymeric Membranes in Wastewater Treatment”
The discussion took place in the postgraduate hall located in Building C within the department on Thursday, 2/11/2023 at nine o'clock in the morning, and the discussion committee consisted of ladies and Gentlemen:
- Prof Dr. Alaa Abdel Hassan Attia, Chairman
- Prof. Dr. Ahmed Abdel Mohamed, member
- Prof. Dr. Khaled Turki Khaled, member
- Asst.Prof.Dr. Muhammad Osama Abbas, member
- Asst.Prof.Dr. Khaled Khudair Abbas, member
- Asst.Prof.Dr. Kazem Matar Shabib, supervisor
- Prof. Dr. Aseel Bassem Abdel Hussein, Supervisor
- Prof. Dr. Qusay Fadel Abdel Hamid, supervisor
In addition, the thesis was scientifically evaluated by Prof. Dr. Talib Muhammad Nayef / University of Babylon / Department of Chemical Engineering, and Asst.Prof.Dr. Imad Abdel Hussein Youssef/ Al-Nahrain University/ College of Science/ Department of Chemistry, and linguistically by Lect. Dr. Ali Abdul Karim Mohsen/University of Technology/Department of Materials Engineering
After the examination committee recorded its comments on the thesis, which covered both explanation and correction, the student's defense of her thesis, and the conclusion of the discussion, the committee convened to evaluate the thesis. They decided to award the student a doctorate degree with a pass grade
Abstract:
Introduce a new biocomposite materials. Consist of biopolymer matrix UHMWPE reinforced with nano particles. Of Hydroxylapatite and titanium dioxide and carbon and Kevlar fiber with different weight fraction.Investigate mechanical physical, and biological properties to inspect suitable properties for this application .design femure bone model to present total deformation and stress analysis numerically.The result showed that increased properties with weight fraction and can be used as implant in human body because of antibacterial inhibition and cell availability and idetincal the experiment result with numerical.
PhD degree
The Department of Materials Engineering at the University of Technology awarded a PhD degree to the student, Wassan Suhail Hussein, Department of Materials Engineering / University of Technology for her thesis titled
“Experimental and Numerical Analysis of Polymeric composite Material for Biomedical Application”
The discussion took place in the postgraduate hall located in Building B within the department on Thursday, 25/10/2023 at nine o'clock in the morning, and the discussion committee consisted of ladies and Gentlemen
Prof. Dr. Abbas Khamas Hussein , Chairman
Asst. Prof. Dr. Khalid murshid Owed, member
Asst Prof. Dr. Kadhim Matar Shabib, member
Asst. Prof. Dr. Sarmad Emad Ebrahim, member
Prof. Dr. Qahtan Adnan Hamad, as a member and supervisor
Prof. Dr. Jawad Kadhim Olaiwi, as a member and supervisor
In addition, the thesis was scientifically evaluated by Prof. Dr. Ahmed Fadhil hamza/ University of Babylon/ College of Materials Engineering and Prof. Dr. Adnan Abduljabar Abdulrazaq /University of Technology/Department of Chemical Engineering, and linguistically by Asst. prof. Dr. Laith Wadah Ismaiel/ University of Technology/Department of Materials Engineering.
After the examination committee recorded its comments on the thesis, which covered both explanation and correction, the student's defense of her thesis, and the conclusion of the discussion, the committee convened to evaluate the thesis. They decided to award the student a PhD degree with a pass grade
Abstract:
This study aimed to improve properties of PMMA resin denture base by blending it with polyamide (PA) type (6) and polyvinylpyrrolidone (PVP) type (K30) and reinforced by sisal and coconut natural powders. Samples were analyzed experimentaly and numerically. Mechanical, physical, miscibility and morphological tests were conducted in this study. Results obtained the most properties value improved when the weight fraction of blends and reinforcing particles increased. The experimental results were in agreement with the numerical results of the finite element analysis.
Teaching staff from the Department of Materials Engineering win second and third places in the university table tennis championship
Teaching staff from the Department of Materials Engineering win second and third places in the university table tennis championship
Assist. Prof. Dr. Kazem Matar Shabib, Lect. Dr. Ali Abdul Karim Mohsen, Department of Materials Engineering, won the second and third places, respectively, in the University of Technology table tennis competition for teaching staff, which was held by the Student Activities Department on Wednesday and Thursday, 18-19/10/2023, in the table tennis hall.
