A Facility Staff  from the Department of Materials Engineering participates in the membership of the editorial board of several Journals within Scopus containers
Share Prof. Dr. Akram Rahim Jubber is a member of the editorial board of several Scopus Journals such as Key to Engineering Materials, Energy Procedia, Technologies and Materials for Renewable Energy, Environment and Sustainability.  Not To Mention that Prof .Dr. Akram Rahim Jubber has participated in an Indexing of special issue of Key to Engineering Materials magazine with other researchers under the title Advanced Materials and Application Technology II

A teacher from the Department of Materials Engineering at the University of Technology participates in the discussion of a master's student from the University of Babylon / College of Materials Engineering

Prof. Dr. Akram Rahim Gabr from the Department of Materials Engineering / University of Technology, Participated as a chairman in the discussion committee for master’s student "Ahmed Amer Falih" for his tagged thesis

"Fabrication of CNT -Based polymer nano composites for high electro sensitivity application by electro spinning technique"

Where the discussion, was held on Thursday, 11/18/2021. The discussion committee consisted of:

1. Prof. Dr. Akram Rahim Jabr, President
2. Prof. Dr. Awda Jabar Breahi member
3. Assist. Prof. Dr. Saleh Abbas Habib is a member
4. Prof. Dr. Hana Jawad Kazem Member

After the discussion committee recorded its observations on the thesis, which were included explanation and correction and the student’s defense of her message, and the discussion ended, the committee decided to evaluate the thesis and decided to grant the student a master’s degree with a full grade.

The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student "Ghufran Dhafer Khaled", Department of Materials Engineering / University of Technology, for her tagged thesis.

"Fabrication and Characterization of Composite Coating by Electrostatic Spray Method"

Where the discussion took place in the Postgraduate Studies Hall in Building C in the department on Tuesday 16/11/2021, and the discussion committee consisted of:

1. Prof. Dr. Alaa Abdel Hassan Attia (Chairman)
2. Assist. Prof. Dr. Rana Saba Jawad (Member)
3. Lect. Dr. Sura Salem Ahmed (Member)
4. Lect. Dr. Muhannad Najah Jawad (Supervisor and member)
5. Assist. Prof. Dr. Hana Arir Smeij (Supervisor and member)

The dissertation had evaluated scientifically by Prof. Dr. Basil Ajeel Abbas/ University of Babylon/ College of Materials Engineering and Senior Research Leader Dr. Hussain Muhammad Yousef/ Ministry of Industry and Minerals/ State Company for Steel Industries, and linguistically by Assist. Prof. Dr. Laith Waddah Ismail/ University of Technology/ Materials Engineering Department.

Abstract

316L stainless steel alloys are extensively used in orthopedic applications for the fixations and substitutions of defective bone tissues in the human body. this study attempts to increase the alloy's resistance against corrosion, and improve the bone-implant interaction by encouraging the osseointegration while maintaining its good mechanical properties, through applying a modified coating layer of PMMA-based composites with two different bio-active ceramics i.e. hydroxyapatite and titanium carbide as reinforcement materials using dry electrostatic spray deposition (ESD) under constant conditions. The biological behavior of the coated samples was studied by investigating their corrosion, antibacterial, and wetting attributes. The results revealed that a high surface wettability, good osteoconductivity, improved antibacterial, and anticorrosion attributions were also observed. 

After the discussion committee recorded its observations on the thesis, which were divided between explanation and correction and the student’s defense of her message and the discussion ended, the committee decided to evaluate the thesis, and decided to grant the student a master’s degree with a full grade.

The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student "Doaa Ahmed Yassin", Department of Materials Engineering/ University of Technology for her tagged thesis

"Improving and Microbiological Monitoring of Building Quality Using Fabricated Ceramic Nano powders"

 Where the discussion took place in the Postgraduate Studies Hall in Building C in the department on Wednesday 17/11/2021, and the discussion committee consisted of:

1. Prof. Dr. Ahmed Mohamed Hassan Al-Ghabban (Chairman)
2. Prof. Dr. Saad Badri Hassoun (Member)
3. Prof. Dr. Mohsen Abbas Aswad (Member)
4. Assist. Prof. Dr. Hussein Alaa Jaber (Member)
5. Assist. Prof. Dr. Ali Attia Jabr (Member)
6. Prof. Dr. Farhad Muhammad Othman (Supervisor and member)
7. Prof. Dr. Alaa Aladdin Abdel Hamid (Supervisor and member)

The dissertation had evaluated scientifically by Assist. Prof. Dr.   Muhammad Jawad Kazim/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering and Assist. Prof. Dr.  Shatha Sadiq Hassan/ University of Technology/ Civil Engineering Department, and linguistically by Assist. Prof. Dr.  Samir Ali Amin/ University of Technology/ Mechanical Engineering Department.

Abstract

The study aimed to improve and reduce bacterial growth and environmental pollution by using ceramic nanoparticles powders included in cement mortar. Cement mortar modified by Nano-Composite Powders (NCPs) was fabricated in order to study the effect imposed by these NCPs on the biological, physical and mechanical properties. The NCPs that were used in this study are (CuO-MgO, CuO-ZnO, and CuO-CoO). These NCPs were prepared by the sol gel method. The results show CuO-MgO, CuO-ZnO and CuO-CoO NCPs give improvement in the physical, mechanical and biological properties to a greater extent than the control cement mortar without NCPs and specifically anti-bacteria and toxicity property.

After the discussion, the committee recorded its notes on the thesis, which were split between explanation and correction, and the student’s defense of her work and the discussion ended. The committee decided to evaluate the thesis and grant the student a doctorate degree with a full grade.

The chairperson of the Psychological Guidance and Educational Guidance Committee, Prof. Dr. Wafa'a Mahdi Saleh, a facility staff  in the Department of Materials Engineering with a number of female students in The Dorms, on Wednesday 16/11/2021. The meeting was attended by the Director of The  Dorms, Dr. Mohannad Najah Jawad,  Dr. Sura Salem Ahmed, the chairperson of the Psychological Guidance and Educational Orientation Committee listened to the problems, obstacles and difficulties facing female students inside and outside the department. Mohannad Najah and Ms. Prof. Wafa'a Mahdi Promised  to solve all the difficulties facing the students, and on the other hand, Prof. Wafa'a Mahdi stressed the need to adhere to the university’s instructions, including the commitment to Dress Code the appropriate dress in which  reflects the identity of the university’s students, and the commitment to preventive Safety Measures to preserve the health and safety of female students.