اخبار القسم en
Patent
Central Organization for Standardization and Quality Control / Ministry of Planning granted a patent in the number 4863 dated 28/2/2017 to the academic staff in the Department of Materials Engineering / University of Technology (Dr. Aseel B. Abdul Hussain, Dr. Emad Saadi Abdul Karim, Marwa Sobhi Ata-Allah, where the patent was entitled:
"Manufacturing of alternative materials resistant to erosion and corrosion of aircraft structures, ship fans and marine craft consisting of nanomaterial composites"
In this work, it was prepared an anti-erosion and corrosion-resistant composite consisting of pure polyester reinforced with (fiber glass, Kevlar fiber, carbon fiber and carbon nanotubes) subjected to the same conditions that the outer parts of the aircraft, ship fans and marine boats exposes, with similar salinity and fine particles collisions with external structures and so on.
It has been noted significantly that the samples resist degradation, which can be taken advantage of these alternative materials to be cheap, light and anti-corrosion materials under conditions that may be exposed to. Also it can be manufacturing these structures with long life materials more than one time. Also it is clean, green and environmental friendly.
Acknowledgments
On 2/10/2017 Prof. Dr. Amin Daway Thamir, President of the University of Technology, presented a thankful and appreciation letter No. 122 to Dr. Aseel B. Abdulhussein, Dr. Dr. Fadhil A. Hashim, and Eng. Tamara Raad Kadhim in the Department of Materials Engineering due to their patent (manufacture of corrosion-resistant material of nanomaterials for space applications) according to the followed mechanism by the university.
Thesis discussion
On 18/10/2017, Head of General Materials Engineering Branch/ Department of Materials Engineering at the University of Technology, Assist Prof. Dr. Jawad K.Oleiwi participated in a committee to discuss the Master's thesis for the graduate student Ahmed Adel Kadhim / Faculty of Engineering at the University of Kufa which entitled:
"Study of the effect of pre-tension of steel wires on the mechanical properties of bead ply of Babylon tire".
Thesis discussion
|
19/10/2017 |
|
On 19/10/2017 Assist Prof. Dr. Ahmed M. Al-Ghaban; Head of Materials Engineering Department Department/ University of Technology, participated as ahead in discussion committee of Master Student Othman Abdulhussain Hamza / Collage of Engineering / Al-Kufa University to entitled thesis: Where the discussion was done in discussion hall of Dr. Muneer Al-Mozafer in Kufa University. The work achieved excellent degree in evalution.
|
Meeting with dental students
On 27/11/2017, the Head of Materials Engineering Department - Ahmed Mohammed Hassan Al-Ghabban and two faculty staff from the Department of Materials Engineering with postgraduate students (PhD) in the Faculty of Dentistry / University of Baghdad on the occasion of the graduation of Dr. Saad Badri Hassoun to the degree of professorship and praised the graduate students the role of engineering materials in the field of dentistry through lectures and the use of laboratories in the side Research.
The welcome reception for the first class
On 29/11/2017 he held the Department of Materials Engineering / University of Technology in the presence of the Assistant President of the University for Scientific Affairs. Alaa Abdul-Hassan Attiah and Head of Materials Engineering Department /Ahmed Mohamed Hassan Al-Ghabban and a group of facility staff of Materials Engineering Department received the reception of the first class of the department where Dr. Ahmed gave a speech welcoming the new students wishing them success and success during their careers in the university and in particular in the materials engineering department. Then he gave some general instructions and instructions which contribute to facilitating some things may seem opaque to new students and clarify and answer all inquiries by students.
Comprehensive exam
On 3/12/2017 the postgraduate students (PhD) in Materials Engineering Department - University of Technology held the comprehensive exam.
Acknowledgments
On 12/11/2017 Dr. Mohammed Kashkoul Alwan received a letter of thanks and appreciation from the number 27412 on 15/11/2017 by His Excellency the Minister of Higher Education and Scientific Research Prof. Abdul Razzaq Abdul Jalil Al-Issa For his outstanding efforts in completing his doctorate during the specified period.
Participation in a conference
On 21/11/2017, ADM participated in the workshop. Aseel Basem Al-Zubaidi and M. Shatha Riyad / Materials Engineering Department, University of Technology at the First International Scientific Conference of the Faculty of Science, Nahrain University, which was held at the University of Nahrain University / Faculty of Science / Conference Hall for the period 21-22/11/2017.
(Measurement of wear and hardness of epoxy-reinforced glass fiber plus nanomaterials and micronutrients for titanium dioxide TiO2).
On 12/11/2017 Dr. Mohammed Kashkoul Alwan received a letter of thanks and appreciation from the number 27412 on 15/11/2017 by His Excellency the Minister of Higher Education and Scientific Research Prof. Abdul Razzaq Abdul Jalil Al-Issa For his outstanding efforts in completing his doctorate during the specified period.
More...
On July 16, 2017, the Central Agency for Standardization and Quality Control granted the patent number 4988 to each of the two teaching assistants: M. Dr. Sehamah Issa Saleh Al-Shalaji and a. M. Dr. Fadel Abbas Hashem University of Technology / Materials Engineering Department with MA. Dr.. Odeh Jabbar Berhi Masoudi / University of Babylon Faculty - Materials Engineering and tagged:
(Polyamerican super absorbent synthesis of harmful Eichhornia herb and its use in the fortification of the microcrystals, combating desertification and rheumatism).
Teaching Staff Lecture Dr. Mohammed Kashkol Alwan from the Materials Engineering Department at the University of Technology Has published a paper in the Arab Journal of Science and Engineering entitled:
"A comparative study of the behavior of the first and second style to break down the epoxy-reinforced epoxy composite panels and stuffed with minutes of borax and minutes"
And the purpose of this research is to study the mechanical properties and durability of the fracture classification of these overlays where the research consecrated on the use of borax particles a filler and strengthens the Matrix material has been punctuated Borax Particles gave good results compared with Matrix s and a few silicon carbide Particles . Knowing that this journal is classified in the Thomson Reuters and it has Impact factor of (0.865).
At view of ministry of higher education and scientific research in checking the university performance in Iraq, Assist. Prof Dr. fadhel Hashim from technique university of middle Euphrates supervised on a committee of performance check, which starting their job in first meeting held in materials engineering dep.at 20/2/2017, were this committee explain their jobs and it will continue in their jobs till finish.
On 02.26.2017 a lecture was presented by Assist. Prof. Dr. Farhad Mohamed Osman the scientific associate of the Department of Materials Engineering titled:
Review of Rapid Prototype Manufacturing
Which focused on the use of process rapid modeling for the manufacture of prototypes or finished products or the number or templates for polymeric, metallic and ceramic, and techniques where described according to input of the manufacturing process whether the material is a liquid or solid or in the form of powder. This will lead to overcome many of the difficulties associated with the production of the usual means. The lecture was presented in the graduate department hall in the presence of some of the professors of the department and graduate students
