اخبار القسم en
PhD Thesis
University report
Congratulations letter
University Orders
Prof. Emad Hussein Merza / President of the University of Technology awarded a letter of thanks and appreciation to each of the prof. Dr. Fadel Abbas Hashim and Ahmed Ameed Zein El Abidine, according to the book number M / 9/791 on 27/6/2019 in appreciation of the efforts exerted by them in supervising the graduate student (Shams Hadi Assi), which has worked with effort and perseverance in completing the requirements of the study before the end Duration specified in the instructions.
Prof. Emad Hussein Merza / President of the University of Technology awarded a letter of thanks and appreciation to Eng. Balsam Menem Saleh, according to the book number M / 9/789 dated 27/6/2019 in appreciation of the efforts made by her in completing the study requirements before the end of the period specified in the instructions.
Prof. Emad Hussein Merza / President of the University of Technology awarded a letter of thanks and appreciation to each of the prof. Emad Saadi Abdul Karim, a professor Jamal Jalal Daoud, Prof. Dr. Fadel Abbas Hashim Nevine Gamal Abdel Kader, Dr.. Suhama Issa Saleh, Asst.Prof.Dr. Jawad Kazem Alaiwi, Asst.Prof. Aseel Basem Abdul Hussain, Asst. Prof. Dr.Nahed Mahmoud Ali, according to the book number M / 9/790 on 27/6/2019 appreciation for the efforts made by them in the supervision of graduate students (Balsam Moneim Saleh, Katter Al-nada Faris, Arkan Saad Mohammed, Afrah Khalid Naseer) which It paid off with effort and perseverance in completing the study requirements before the end of the period specified in the instructions.
Prof. Dr. Ahmed Mohamed Hassan Al-Ghabban / Head of Materials Engineering Department Dr. Raad Suhail Ahmed Adnan, Dr. Eyad Kazem Hassan,. Muhannad Najem Abdulwahed, Asst.Lect. Ali Kamel Ahmed, Senior Engineer Samar Qahtan Saadoun, numbered 5GD / 2116 dated 3/7/2019 in appreciation of their efforts and distinguished achievements and achievements of the work assigned to them within the site section and e-learning committee in the department.
Prof. Dr. Ahmed Mohamed Hassan Al-Ghabban / Head of Materials Engineering Department gave a letter of thanks and appreciation to Prof. Wafa Mahdi Saleh, MD Manar Abdul Jabbar Najm, m. Dr. Mayada Shannan Abed, Dr.Laith Waddah Ismail, Lect Aseel Mahmoud Abdullah, number 5 C D / 2117 dated 3/7/2019 in appreciation of their efforts and distinguished achievements and achievements of the work entrusted to them within the Audit Committee of Graduate Studies in the Department of Materials Engineering.
Maintenance News
Scientific Promotion
honoring
competitive exam
Many testing and inspection machines were maintenance and installed by maintenance committee members of Lec. Dr. Khalid K. Abbass and Eng. Mohammed M. Jabbar under supervision of Assist. Prof. Dr. Ahmed A. Zainulabdeen. The round two include:
- Maintenance of Nabertherm computerized furnace which work up to 1200o
- Installation of other Nabertherm furnace which work up to 1700 o
- Maintenance of Carbolite muffle furnace which work up to 1200o
More...
Many testing and inspection machines were maintenance and installed by maintenance committee members of Lec. Dr. Khalid K. Abbass and Eng. Mohammed M. Jabbar under supervision of Assist. Prof. Dr. Ahmed A. Zainulabdeen. The round one include installation of Atomic Absorption (PG instrument AA500) with two types, first: with a flame and accuracy of part per million(PPM), second; without flame which contain graphite furnace and an accuracy of part per billions (PPB), with installation of all their accessories. These inspection functions are elemental analysis in liquids with high precision.
- Diyala Journal of Engineering Sciences Had Published a paper titled:
Effect of Annealing Treatment on the Anisotropy Behavior of Cold Rolled Stainless Steel 304 Sheets
In this work the effect of annealing treatment on texture and anisotropy behavior of cold rolled stainless steel 304 sheets were investigated. Different annealing temperatures were used to study their effects on anisotropy behavior. The results show that the normal anisotropy value of annealed samples at 1150°C increases by (31%) and significant reduction (about 88.7%) in planar anisotropy value as compared to the received samples.
-
Lecturer Jabbar Hussein Mohammed Had Participated in 4th Iraq oil and gas conference which hold at Basra with a paper titled:
Effect of Different Quenching Media on Microstructure, Hardness, and Wear Behavi or of Steel Used in Petroleum Industries
The main aim of this study is to get the optimal conditions for heat treatment which brought the best combination of mechanical properties of medium carbon steel without tempering treatment. Thus, in current study, an investigation of effects of polymer solution media on the quenching process was carried out with samples made of medium carbon steel. The samples were quenched in different concentrations of polymer (polyalkylene glycol) solution. The results show that the quenched samples in polymer solution with 10% polyalkylene glycol were brought the best combination of mechanical properties as compared with other quenched and tempered samples.
- Al-Khwarizmi Engineering Journal Published a Paper article titled:
Evaluation the Mechanical Properties of Kaolin Particulate Reinforced Epoxy Composites
for Lecture Jabar Hussein Mohammed and In the current study, the influence of adding kaolin with variable particle size on the mechanical properties (flexural modulus E, toughness Gc, fracture toughness Kc, hardness HB, and Wear rate WR) of epoxy resin was evaluated. Composites of epoxy with varying concentrations of kaolin were prepared. The composites showed improved in properties with the addition of filler and with the decrease in particle size. In addition, in this study, multiple regression models were developed by utilizing (SPSS) package to predict the properties of kaolin reinforced epoxy composites. Good agreement was obtained between the predicted and the experimental results.
- The Engineering and Technology Journal had published a Paper titled:
Experimental Study for the Effects of Crystalline Agents on Properties of Glass-Ceramic Coating
In this work, four series of glass-ceramic coatings were developed and applied by using the dipping technique to cast iron sheets. The influence of different types of crystallization agents was investigated in relation to the mechanical features of the coatings. The results indicated that the coating properties were strongly dependent on composition and concentration of crystallization agent. Coating with feldspar gives the highest value of hardness and adhesion index. In general, properties of the resultant coatings were improved in all cases; this is related to the formation of a complicated network from crystalline phases.
- Lecturer Jabbar Hussein Mohmed Had Participied in The 1st International Conference on Materials Engineering and Science (IConMEAS),which was Held in Istanbul Aydin University – Turkey with a paper titled:
The effect of polymeric quenching media on mechanical properties of medium carbon steel
and Abstract. In this work, a polymer solution of Polyvinyl pyrrolidone (PVP) with different concentrations in water with different bath temperatures were used to quenching samples of medium carbon steel alloy. The mechanical properties and microstructure examination were evaluated for quenched samples and compered to those of water quenched samples. The results show that the best combination of properties can be achieve with 20% PVP quenched samples at 40oC. This treatment can be used instead of water quenching and tempering treatment for medium carbon steel samples and consequently reduce the overall cost of heat treatment process.
Dr Raad Suhail Ahmed Adnan Had Participated in the 1st International Conference of Materials Engineering and Science (IconMEAS 2018) in which held at Istanbul-Aydin University from 8-9thof August 2018 in Istanbul with Paper Entitled
Effect of Sn Addition on Transformation Temperature and Thermal Properties for Cu-Al-Si Shape Memory Alloy
The Author was awarded the Best Oral Presentation of Paper for the Mentioned Paper, The paper Studied the effect of Tin Addition with deferent percentages (0.5,1,3)% to Cu-Al-Ni Shape Memory Alloy on The Thermodynamic Properties (Enthalpy, Entropy, Free Energy ,Activation Energy) by Building a mathematical Model via MATLAB and comparing the results in the three additions.
Materials Today: Proceedings a Scopus indexed journal from Elsevier Publications has published a joint paper for Lect. Dr. Raad Suhail Ahmed Adnan with Prof.Dr, Muna Khitreir Abbass and Retired Dr. Munther Mohammed Al-Kubaisy, a paper entitled
Computer Approach of Effect of 0.3 % of Ge,Te and Ce Additions on Thermodynamic Properties and Shape Memory Effect of Cu-14%Al-4.5%Ni Shape Memory Alloys
The Paper studied the effect of 0.3% addition of Germanium, Tellurium and Cerium on Cu-14%Al-4.5%Ni, which was elaborated by casting, Homogenized, the effect of the additions on Thermo –Mechanical Properties was studied theoretically by building a MATLAB Model to calculate and graph a Hysteresis loop and Thermo-Graphs by DSC and calculating enthalpy and entropy and comparing that with experimental results.
