اخبار القسم en
Honors
At the conclusion of the activities of the ninth cultural season for the Department of Materials Engineering for the academic year 2021-2022, the Head of the Department of Materials Engineering honored The Honorable Asst. Prof .Dr. Hussain Alaa Jaber, awarded certificates, shields and medals to the Chairman and members of the ninth cultural season committee, . the Honorable administrative Deputy Asst. Prof .Dr. Laith Waddah Ismail, gave department shield, to the honorable head of the department, The Honorable Asst. Prof .Dr. Hussain Alaa Jaber, for his continuous support and support to all members of the department.
A trivia competitions f
The Department of Materials Engineering at the University of Technology held intellectual competitions for students at 9 am on Thursday 19/5/2022 in the Graduate Studies Doctoral Hall , which is one of the activities of the ninth cultural season. The competitions included general questions between students of the branches of general materials engineering, ceramics and polymers. , the General Materials Engineering Branch team won this year Compotation's
At the end of the competition, the gifts was given to the participating teams by the Head of the Materials Engineering Department, The Respectable Assistant Professor Dr. Hussein Alaa Jaber.
- A scientific promotion - Ms. Ruaa Haitham
The teaching staff Ms. Ruaa Haitham Abdul Raheem from the Department of Materials Engineering at the University of Technology has got a scientific promotion from the Title of Lecturer to the Title of assistant professor After fulfilling all the requirements of scientific promotion while enjoying all the rights and privileges conferred on this title , according to the university order No. SP/193 dated 5/2022
A scientific lecture - the ninth cultural season
The Department of Materials Engineering at the University of Technology held a scientific lecture entitled: "Nanotechnology and Building Materials" in the Doctoral Hall in the Department of Materials Engineering at 9 am on Wednesday 18th of May 2022, and it is one of the activities of the ninth cultural season. The lecture was given by Senior Chief of Engineers Zina Faisal Khudair, the lecture included the uses of nanotechnology and its applications in concrete, paint and building materials.
At the end of the lecture, the appreciation certificate and shield were distributed to the lecture by the Head of the Materials Engineering Department, Assistant Professor Dr. Hussein Alaa Jaber, the respected
An awareness and educational lecture
The Department of Materials Engineering at the University of Technology held an awareness and informative lecture entitled:
"The Devastative effects of drug abuse on the individual and society" in the "Doctoral Hall " in the Department of Materials Engineering at 10 am on Wednesday, 05/18/2022, and it is one of the activities of the ninth cultural season. The lecture was delivered by Lecture Iman Kazem Hamza, and the lecture dealt with the importance of health education by helping individuals solve the health problems they face and spreading sound health concepts among members of society. and methods of treatment.
At the end of the lecture, certificates of appreciation for the lecture and some of the participants in the cultural season were distributed by the Head of the Materials Engineering Department, Assistant Professor Dr. Hussein Alaa Jaber.
Sports competitions
The Department of Materials Engineering at the University of Technology held sports competitions for students in cooperation with the Ministry of Youth and Sports at the University of Technology Stadium on Wednesday, 05/18/2022. This is one of the activities of the ninth cultural season of the department. They have.
At the end of the competitions, the head of the department The Honorable Asst.Prof Dr. Hussein Alaa Jaber gave certificates of appreciation to those in charge of sporting events, as well as awarded medals to students who won various sports competitions in the cultural season.
The exams of the second course for postgraduate students
The Department of Materials Engineering / University of Technology has started the exams of the second course for postgraduate students for the academic year 2021-2022
The Honorable President of the University of Technology, Prof. Dr. Ahmed Mohamed Hassan Al-Ghabban, inspected on Sunday, 5/15/2022 the second semester exam for postgraduate students, masters and doctorates in the Department of Materials Engineering, and was received by the head of the department and his assistants.
During the tour أHe reviewed the mechanisms used, the type of exam questions, their difficulty, and the plans in place during the examination period . The president of the university praised the efforts made by the department’s presidency, exam committees and all cadres in serving students and providing all their needs, wishing everyone continued success and success in the service of our dear university.
An awareness and educational lecture
The Department of Materials Engineering at the University of Technology held an awareness and informative lecture entitled
"Health awareness among university students" in Al-Kindi Hall in the Department of Electromechanical Engineering at 10 am on Tuesday 17/5/2022 and it is one of the activities of the ninth cultural season. The lecture was delivered by Dr. Haitham Mikhlif Al-Obaidi and Dr. Hussein Mahdi Al-Beer. The lecture included the importance of health education by helping individuals solve the health problems they face and spreading sound health concepts among members of the community. The lecture also dealt with the most important points for solving behavioral problems by training students to solve them, data analysis, and the ability to lead and make decisions.
At the end of the lecture, certificates of appreciation were distributed to both lecturers by the Head of the Materials Engineering Department, Assistant Professor Dr. Hussein Alaa Jaber, the respected.
The ninth cultural season
Under the patronage of the President of the University of Technology, Prof. Dr. Ahmed Mohamed Hassan Al-Ghabban, and under the supervision of the Head of the Department, The respected Asst. Prof. Dr. Hussein Alaa Jaber, the Department of Materials Engineering at the university held the ninth cultural season for the academic year 2021-2022 and for the period from 15-19/5/2022
Where the activities of the first day began with playing the national anthem and reading a verse from the Holy Quran. After that, a speech by the head of the department said that this cultural season will include various educational lectures, exhibitions of fine arts, an AutoCAD Drawings exhibition, charitable bazaar, and sports and intellectual competitions for students and showed that the main reason for holding this season because It opens horizons for our students to learn about their artistic and sports activities and to refine their creativity and innovations.
the first cultural session was launched per day of the season at was Chaired by the assistant lecturer Haider Basil Ali, which included one introductory lecture about the Al-Ain Foundation delivered by Professor Ali Karim, in which he presented a historical overview of the establishment of the Al-Ain Foundation and its launch to document the victims of martyrs and terrorism and the care of orphans within the file of orphans sponsorship and addressed the positions of the University of Technology in this The framework and its most humane name, which began more than 6 years ago, and which was called a good imprint, was launched by the students of the University of Technology.
In a related context, the Honorable President of the University inaugurated an exhibition of plastic arts, an AutoCAD exhibition for students, and a charity bazaar in the department.
Award a Master degree
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student Nariman Hussain Muhammad, Department of Materials Engineering/ University of Technology for her thesis Titled:
"Improving the Dielectric Properties of Ceramics by Adding
Nano powders to Glaze Coating Layer"
Where the discussion took place in the Graduate Studies Hall in Building C in the department on Monday, 4/6/2021 at nine in the morning, and the discussion committee consisted of the Following:
1. Prof.Dr . Farhad Muhammad Othman, chairman
2. Prof.Dr,. Enas Mohi Hadi as a Member
3. Asst.Prof .Dr . Hamza Mustafa Kamal as a Member
4.Asst.Prof .Dr . Hussein Alaa Jaber as a Supervising member
5. Prof. Dr. Shehab Ahmed Zeidan as a Supervising member
As well as a scientific evaluation of the thesis by asst. prof. Dr Mujahid Ahmed Negm/ University of Technology/ Department of Applied Sciences, and Asst. Prof.Dr. Raouf Muhammad Raouf/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering, and linguistically by Asst . Prof .Dr . Laith Waddah Ismail/ University of Technology/ Materials Engineering Department.
After the Members of discussion committee recorded its observations on the thesis, which were between explanation and correction and the student’s defense of her Thesis and the end of the discussion, the committee decided to evaluate the thesis, and decided to grant the student a master’s degree with a Pass grade.
Abstract:
Dielectric ceramics are the basic building block of every electronic device, especially for high-temperature applications, and enhancing its dielectric constant, dielectric loss polarization and a high electric breakdown strength plays a key role in producing advanced electronic components. So according to these facts, a new technique is used in this work to improve the dielectric properties of ceramics. This technique involves adding nano and micro (PbZrxTi1-xO3) Lead Zirconate Titanate PZT ceramic powders to the glaze layer of porcelain the dielectric strength for the glazed porcelain showed an increase of up to 30 wt % of the PZT additives in both nano and practical micro. Dielectric constant ԑ", Dielectric loss tangent tan δ and AC.conductivity showed an increase after glazing with nano-PZT higher than in micro-PZT.
More...
Award a Master degree
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student Noor Muhammad Salih, Department of Materials Engineering/ University of Technology, for her thesis Titled:
"Biostimulation of a mineral substrate by the use of natural materials"
Bio-Functionalization of Metallic substrate Using natural bio-materials
Where the discussion took place in the Graduate Studies Hall in Building C in the department on Monday, 3/28/2021 at eleven in the morning, and the discussion committee consisted of following:
1. Prof. Dr. Ahmed Mohamed Hassan Al-Ghabban ,as Chairmen
2. Prof.Dr. Nawal Mohamed Daoud, as a Member
3. Lect. Dr. Muhannad Najah Jawad as Member
4. Prof. Dr. Aseel Bassem Abdul-Hussein as a Supervising member
5. Asst.Prof .DR. Fatima Jaafar Muhammad as a Supervising member
As well as evaluating the message scientifically by Prof. Dr. Abdul Rahim Kazem Abd Ali/ University of Babylon/ College of Materials Engineering, and Asst. Prof.Dr. Ali Ebadi Latif/ University of Technology/ Department of Applied Sciences, and linguistically by Asst. Prof. Zainab Naef Rashid/ University of Technology/ Department of Applied Sciences.
After the discussion committee recorded its observations on the thesis, which were between explanation and correction and the student’s defense of her Thesis and the discussion the committee decided to evaluate the thesis, and decided to grant the student a master’s degree with a Pass Grade.
Abstract:
In this research, the focus was on preparing green implants with biocompatibility and appropriate mechanical properties, in addition to improving their anti-inflammatory properties. Hydroxyapatite was extracted from natural sources (eggshells, fish bones and cockle shells) by calcination method. For the first group, natural hydroxyapatite was mixed with a prepared natural polymer (aloe Vera gel + alginate), stainless steel samples were then coated. For the second group, mastic was added to the coating material. The results proved that the implant has biological properties, as the result of MTT shows an increase in the availability of cells for all samples. The tests also proved that these implants have anti-fungal and anti-bacterial properties, and the addition of the mastic led to an improvement in the inhibition of bacteria and fungi.
Award a Master degree
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student Sarmad Sharq Nuri, Department of Materials Engineering/ University of Technology, for his thesis titled:
"Recycling of Local industries Waste to Produce Corrosion Inhibitors for Mild Steel in Different Corrosive Media"
Where the discussion took place in the Graduate Studies Hall in Building C in the department on Tuesday, 4/26/2021 at nine in the morning, and the discussion committee consisted of the following:
1. Prof. Abbas Khammas Hussein, President
2. Asst .prof .Dr.. Nahed Mahmoud Ali as Member
3. Lect.Dr. Ahmed Muzaffar Hashem, as a Member
4. Asst .prof .Dr. Fadel Abbas Hashem, as a supervising Member
5. Asst .prof .Dr.. Nevin Gamal Abdel Qader as a supervising Member
As well as evaluating the message scientifically by Prof.Dr. Ali Hobi Halim/ Babylon University/ College of Materials Engineering, andAsst. Prof. Dr. Khaled Hamed Rashid/ University of Technology/ Department of Chemical Engineering, and linguistically by Asst. Prof.Dr Laith Waddah Ismail/ University of Technology/ Materials Engineering Department.
After the Members of The Discussion committee recorded their observations on the thesis, which were divided between explanation and correction and the student’s defense of his message and the end of the discussion, the committee decided to evaluate the thesis, and decided to grant the student a master’s degree with a Pass grade.
Abstract:
This work aims to examine two types of local industrial waste (sodium silicate and styrene-butadiene) with different concentrations to be utilized as corrosion inhibitors for mild steel in a 3.5% NaCl solution. The corrosion rates obtained from polarization measurements showed good inhibition efficiency, and the optimum concentration of sodium silicate at 3 ml with an inhibition efficiency of 84.5%, and for styrene-butadiene at 4 ml with an inhibition efficiency of 98.5%. The surface analysis by FTIR, FESEM, and XRD showed that these inhibitors contain many functional groups act as corrosion inhibitors, and the absorption and presence of inhibitor particles on the metal surface was also confirmed, forming a smooth protective layer that protects the metal.
Award a doctorate degree
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student Saja Aqil Musa, Department of Materials Engineering/ University of Technology, for her thesis titled:
"Preparation and characterization of drug delivery biomaterials system"
the Disscussion took place in the Graduate Studies Hall in Building C in the department on Tuesday 19/4/1921 at nine in the morning, and the discussion committee consisted of following ladies and Gentlemen:
1. Prof. Dr. Saad Badri Hasson Farid , as Chairman
2. Asst .Prof.Dr.. Ali Hussein Alwanas as a Member
3.Prof.Dr. Kazem Matar Shabib, as a Member
4. Prof.Dr. Auoda Jabbar Brihi is back as a member
5. Asst.Prof.Dr. Nevin Gamal Abdel Qader is a member
6. Prof.Dr. Akram Rahim Jabr is an honorable member
7. Prof. Dr. Emad Saadi Abdel Karim is an honorable member
8. Assst.prof .Dr. Ahmed Majid Al-Shamry is an honorable member
As well as evaluating the message scientifically by Prof.Dr. Kazem Kamel Rasan/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering, and Asst. Masaar Najm Obaid / University of Babylon / College of Materials Engineering, and linguistically by Asst Prof. Zainab Naef Rashid/ University of Technology/ Department of Applied Sciences.
After the Members of discussion committee recorded Their observations on the thesis, which were divided between explanation and correction and the student’s defense of her thesis and the discussion ended, the committee decided to evaluate the thesis, and decided to grant the student a doctorate degree with a Pass grade.
Award a doctorate degree
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student Esraa Faisal Ghazi, Department of Materials Engineering/ University of Technology, for her tagged thesis
"Fabrication and Characterization of Polymeric Hybrid Composite Materials for Biomedical Application"
Where the discussion took place in the Graduate Studies Hall in Building C in the department on Thursday, 4/7/2021 at nine in the morning, and the discussion committee consisted of Following Ladies and Gentlemen:
1. Prof. Wafaa Mahdi Saleh as President
2. Prof. Bashar Awaid Badawi, as a member
3. Prof. Ahmed Fadel Hamza as aMember
4. Asst.Prof.Dr. Khaled Khudair Abbas as a Member
5. Asst.Prof.Dr. Alia Hussein Abdel Salam as a Member
6. Asst.Prof.Dr. Jawad Kazem Aliwi as a Supervising member
7. Prof.Dr. Sihama Issa Saleh as a Supervising member
8. Prof.Dr Muhammad Ali Matarias a Supervising member
As well as a scientific evaluation of the thesis by a Assisitant professor. Dr. Ghanem Shaker Sadiq/Al-Nahrain University/College of Engineering/Mechanical Engineering Department, and Asst. Prof.Dr. Sadir Muwaffaq Majeed/ University of Technology/ Department of Applied Sciences, and linguistically by Asst. Prof. Laith Waddah Ismail/ University of Technology/ Materials Engineering Department.
Abstract:
316L stainless steel alloys are widely employed in the biomedical application for replacement defect bones for old and young .This study aims to improve the coating layer by applying pulsed electrophoretic deposition PEFD technique by depositing a coating layer from chitosan and hydroxyapatite. The characterization of the layer was done using scanning electron microscope spectroscopy Infrared spectroscope, contact angle and adhesion strength. The results showed that a homogeneous coating layer free of cracks and bubbles was obtained under a deposition time 10 minutes , frequency 50 Hz and a concentration of hydroxyapatite 0.6 g /100 ml with a layer of coating resistant to E- coli bacteria.
