اخبار القسم en
ٍAward a master's degree to Zainab Khaled
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student "Zainab Khaled Younes", Department of the Materials Engineering/ University of Technology, for her tagged thesis.
"Evolution of mechanical behavior for Nano composite plates"
Where the discussion took place in the Postgraduate Studies Hall in Building C in the department on Wednesday 10/11/2021, and the discussion committee consisted of:
- Assist. Prof. Dr. Jamal Jalal Daoud (Chairman)
- Assist. Prof. Dr. Fatima Jaafar Muhammad (Member)
- Assist. Prof. Dr. Hamed Ali Hussein (Member)
- Prof. Dr. Abbas Khammas Hussein (Supervisor and member)
- Assist. Prof. Dr. Laith Qais Abbas (Supervisor and member)
The dissertation had evaluated scientifically by Assist. Prof. Dr. Basem Ajil Abbas/ University of Babylon/ College of Materials Engineering and Assist. Prof. Dr. Muhammad Jawad Muhammad/ University of Technology/ Department of Electrochemical Engineering, and linguistically by Senior Lecturer Dr. Naseer Abdul-Hussein Nasser/ University of Technology/ Materials Engineering Department.
Abstract
In this study, the Properties of a polyester-based composites, using nanoparticle fillers ((TiO2) and (SiO2), were investigated. The mechanical, physical, miscibility and morphology tests were studied Moreover, buckling analysis of nanocomposite plates with cutout was investigated including the effect of design parameters such as cutout shape, size, position, direction, number of cutouts etc. in addition to the plate aspect ratio on the buckling behavior and comparing the experimental and numerical results. The main conclusion was that the presence of cutout could equally well raise the buckling load just as much as lower it. On the other hand, the experimental results were better than the numerical results with percentage (2.3-8.2%). Nanocomposite plates are utilized as underlying parts in aviation, auto and marine designing constructions. Patterns are generally set up as access ports in electrical and mechanical structures or only for decreasing weight.
After the discussion, the committee recorded its notes on the thesis, which were split between explanation and correction, and the student’s defense of her work and the discussion ended. The committee decided to evaluate the thesis and grant the student a master’s degree with a full grade.
ٍAward a master's degree to Iftikhar Amer
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student "Iftikhar Amer Selim", Department of the Materials Engineering/ University of Technology for her tagged thesis.
"Fabrication of Body Armor from Hybrid Composites"
Where the discussion took place in the Postgraduate Studies Hall in Building B in the department on Wednesday 10/11/2021, and the discussion committee consisted of:
- Assist. Prof. Dr. Jawad Kazem Aliwi (Chairman)
- Assist. Prof. Dr. Ali Hussain Muhammad (Member)
- Assist. Prof. Dr. Qahtan Adnan Hamad (Member)
- Assist. Prof. Dr. Mayada Shanan Abed (supervisor and member)
- Assist. Prof. Dr. Biman, accompanied by Ahmed (supervisor and member)
As well, the dissertation was scientifically evaluated by Prof. Ahmed Fadel Hamza/ University of Babylon/ College of Materials Engineering and Prof. Mohsen Nouri Hamza/ University of Technology/ Mechanical Engineering Department. Moreover, it has been linguistically evaluated by Prof. Khaled Khudair Abbas/ University of Technology/ Department of Materials Engineering.
Abstract
This work aims to prepare hybrid composite materials to evaluate their behavior under ballistic impact experimentally and numerically. Multilayered armors were designed as ceramic/woven fabric reinforced epoxy/metal or polymer layer. In experimental ballistic tests, a 9 mm Full Metal Jacket FMJ bullet was launched at 307 m/s towards armor 30*30 cm2. The Finite Element Method (FEM) is used to simulate the ballistic impact resistance of the armor. The results from simulation and experimental testing were compared with ballistic tests and there was a good agreement of these results.
After the discussion, the committee recorded its notes on the thesis, which were split between explanation and correction, and the student’s defense of her work and the discussion ended. The committee decided to evaluate the thesis and grant the student a master’s degree with a full grade.
ٍAward a master's degree to Hala Mohamed
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student Hala Mohamed Shehab, Department of Materials Engineering/ University of Technology, for her tagged thesis (Plastic waste and Sawdust for Sustainable Composite materials)
The discussion was held on the discussions hall / building B / Department of Materials Engineering / University of Technology on Monday (09/11/2021). The discussion committee was formed of the teaching staff listed:
|
Names |
Position in the Committee
|
|
Assist. Prof. Dr. . Muhammad Osama Abbas |
Chief |
|
Assist. Prof. Dr. Rana Thabet Abd |
Member |
|
Lec. Dr. Muhammad Rumeid Gharkan |
Member |
|
Assist.Prof. Dr. Mohamed Abdel Hussein Mohamed |
Supervisor |
|
Assist.Prof. Dr. Sarmad Emad Ibrahim |
Supervisor |
The dissertation was scientifically evaluated by Prof. Dr. Ibtihal Abdul Razzaq Mahmoud/ University of Technology/ Mechanical Engineering Department, and Asist. Prof. Dr. Massar Najim Obaid/ University of Babylon/ College of Materials Engineering and linguistically by Assist. Prof. Dr. Khaled Khudair Abbas/ University of Technology/ Department of Materials Engineering.
Abstract
Prepare wood plastic composite material(WPC) from plastic and sawdust waste to minimize environmental pollution by hand mixing. The (depolymrization pet, VV/55, Unsaturated polyester resin) and Sawdust as reinforcement ( treated and untreated). The results show that specimen with treated sawdust have mechanical and physical properties better than untreated sample.
The discussion of the dissertation was conducted in a scientific atmosphere and a master's degree with grade of pass was awarded to the student after the completion of all the corrections that have been decided by the examiners.
ٍAward a master's degree to Aya Nahed
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student Aya Nahed Mohsen, Department of Materials Engineering/ University of Technology, for her tagged thesis (Advanced coating to make low carbon steel suitable for many industrial applications)
The discussion was held on the discussions hall / building B / Department of Materials Engineering / University of Technology on Monday (08/11/2021). The discussion committee was formed of the teaching staff listed:
|
Names |
Position in the Committee
|
|
Prof. Dr. . Rana Afif Majeed |
Chief |
|
Assist. Prof. Dr. Abdul Rahman Najm |
Member |
|
Lec. Dr. Hind Basil Ali |
Member |
|
Chief researcher Dr. Hussain Muhammad Yusuf |
Supervisor |
|
Lec. Dr. Sura Salem Ahmed |
Supervisor |
The dissertation was scientifically evaluated by Prof. Dr. Abdul Rahim Kazem Abdul Ali / University of Babylon / Faculty of Materials Engineering, and Asist. Prof. Dr. Khaled Hamid Rashid/ University of Technology/ College of Materials Engineering/ Department of Chemical Engineering and linguistically by Lec. Dr. Sondos Karim Juma/ University of Technology/ Electrochemical Engineering Department.
Abstract
The study aimed to enhance corrosion properties for low carbon steel surface by using flame thermal spraying technique to deposit a Ni-Cu (Monel) protective coating overlay. The optimum coating parameters were (125 mm (level 2) spray distance, 30 g (level 3) N10 powder rate, substrate surface roughness, 50 mm/min (level 2) gun carrier transverse velocity). The results of SEM show the coating layer is rich in Ni-Cu, which makes it more resistant to corrosion. XRD showed the Cu and Ni-Cu phases. The erosion rate was measured by using 3.5% NaCl solution showed the minimum weight loss (0.00166 mm/year).
The discussion of the dissertation was conducted in a scientific atmosphere and a master's degree with grade of pass was awarded to the student after the completion of all the corrections that have been decided by the examiners.
ٍAward a master's degree to Zainab Salem
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student Zainab Salem Aziz, Department of Materials Engineering/ University of Technology, for her tagged thesis (Corrosion inhibition by plant extracts for carbon steel)
The discussion was held on the discussions hall / building B / Department of Materials Engineering / University of Technology on Sunday (07/11/2021). The discussion committee was formed of the teaching staff listed:
|
Names |
Position in the Committee
|
|
Prof. Dr. Anis Abdullah Kazem |
Chief |
|
Assist. Prof. Dr. Khaled Khudair Abbas |
Member |
|
Lec. Dr. Shaima Mahdi Saleh |
Member |
|
Prof. Dr. Rana Afif Majeed |
Supervisor |
|
Assist. Prof. Majed Hamid Abdul Majeed |
Supervisor |
The dissertation was scientifically evaluated by Prof. Dr. Owham Mohamed Hamid/ University of Technology / Applied science department, and linguistically by Lec. Dr. Nassier Abdul-Hussain Nassir/ University of Technology / Department of Materials Engineering.
Abstract
In this study, plant extract (wild clary) are tested and applied to steel (AISI l015) to prevent its corrosion in two mediums of sea water and 0.5 M HCl using electrochemical studies at three temperatures (298, 318, 338 K) by adding five concentrations of the extract (5, 10, 15, 20, 25) mL /L. The inhibition efficiency was found to be excellent, reaching 83.078% at a concentration of 20 (ml/L) and a temperature of 298 (K), which is the best concentration in seawater, and 92.944% at a concentration of 25 (ml/L) and a temperature of 298 (K) which is the best concentration in an acid medium hydrochloric.
The discussion of the dissertation was conducted in a scientific atmosphere and a master's degree with grade of pass was awarded to the student after the completion of all the corrections that have been decided by the examiners.
ٍAward a master's degree to Abdul Rahman Kamel
The Department of Materials Engineering at the University of Technology awarded a master’s degree to Abdul Rahman Kamel Abdul Rahim, Department of Materials Engineering/ University of Technology, for his tagged dissertation (Using recycling waste materials for preparing Eco-concrete)
The discussion was held on the discussions hall / building C / Department of Materials Engineering / University of Technology on Sunday (14/11/2021). The discussion committee was formed of the teaching staff listed:
|
Names |
Position in the Committee |
|
Prof. Dr. Alaa Aladdin Abdel Hamid |
Chief |
|
Assist. Prof. Dr. Sarmad Emad Ibrahim |
Member |
|
Assist. Prof. Dr. Ayman Jamil Kazem |
Member |
|
Assist. Prof. Dr. Nahed Mahmoud Ali |
Supervisor |
|
Lec. Dr. Ahmed Hussein Ali |
Supervisor |
The dissertation was scientifically evaluated by Lec. Dr. Raed Kazem Muhammad/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering, and Assist. Prof. Dr. Ali Attia Jabr/ University of Technology/ Civil Engineering Department and linguistically by Lec. Dr. Zainab Nayef Rashid/ University of Technology/ Department of Applied Sciences.
Abstract
The aim of this study is to evaluate the possibility of using waste rubber tires as a substitute for sand and gravel. The physical and mechanical properties of rubber concrete have been tested for various sizes of rubber chopped by proportions different, so the properties that rubber concrete can gain by using this alternative are low cost, lightweight, toughness, shock absorption, and heat insulation, and preserving the environment by providing a safe solution.
The discussion of the dissertation was conducted in a scientific atmosphere and a master's degree with grade of pass was awarded to the student after the completion of all the corrections that have been decided by the examiners.
ٍAward a master's degree to Mohamed Hamed
The Department of Materials Engineering at the University of Technology awarded a master’s degree to Mohamed Hamed Maseikh, Department of Materials Engineering/ University of Technology, for his tagged dissertation (Studying the Development of Erosion Resistance of Al- Cu Alloy by Surface Treatments)
The discussion was held on the discussions hall / building C / Department of Materials Engineering / University of Technology on Monday (15/11/2021). The discussion committee was formed of the teaching staff listed:
|
Names |
Position in the Committee |
|
Assist. Prof. Dr. Fadel Abbas Hashem |
Chief |
|
Assist. Prof. Dr. Najeeb Salman Abtan |
Member |
|
Assist. Prof. Dr. Ahmed Amid Zine El Abidine |
Member |
|
Prof. Dr. Ali Hussein Attiwi |
Supervisor |
|
Assist. Prof. Dr. Jamal Jalal Daoud |
Supervisor |
The dissertation was scientifically evaluated by Assist. Prof. Dr. Bahaa Sami Mahdi/ University of Technology / Production and Minerals Department, and Prof. Dr. Kazem Kamel Rassan / Al-Mustansiriya University/ College of Engineering/ Department of Materials Engineering and linguistically by Assist. Prof. Dr. Mayada Rahim Issa/ University of Technology/ English Language Center.
Abstract
The main objective of this research is to acquire high tribological surface properties by improving the hardness and erosion resistance of alloy 2024, and to study the effect of heat and surface treatments on the hardness and erosion properties. Several heat and surface treatments were applied. These treatments are annealing, solution and aging treatment, plasma nitriding, and duplex surface treatment, which includes plasma sputtering followed by plasma nitridation. The microstructure, hardness and mechanical wear resistance of this alloy were checked before and after each treatment. An erosion tester was manufactured locally to measure the wear resistance of this alloy. X-ray diffraction, scanning electron microscopy, and Vickers hardness were used to characterize the results. The results showed that each treatment differently affects the microstructure, wear resistance and hardness of this alloy.
The discussion of the dissertation was conducted in a scientific atmosphere and a master's degree with grade of pass was awarded to the student after the completion of all the corrections that have been decided by the examiners.
Particupation in Scientific Conference
A Facility Member from The Department of Materials Engineering participates in the membership of The Preparatory Committee for the Third and First International Scientific Conference on Desertification Studies , Asst. Prof. Muhammad Abdul-Hussein Al-Zuhairi, an Faclilty Staff in the Department of Materials Engineering at University of Technology-Iraq as a member of the Preparatory Committee for the Third Scientific and First International Conference for Desert Studies in which was Held at the University of Anbar with cooperation with the Desert Studies Center for the days 17th and 18th of November
The conference included 114 research participants from Iraq, Tunisia, Kuwait, Egypt and the Netherlands, which address the problem of desertification that Iraq and the countries of the region suffer from, with the absence of strategic projects to combat desertification. Known that Asst. Prof .Dr Mohammed Al-Zuhairi is an observer member of the United Nations Convention to Combat Desertification (UNCCD) and an accredited member of the United Nations Environment Program (UNEP).
Membership of the editorial board of Journals within Scopus
A Facility Staff from the Department of Materials Engineering participates in the membership of the editorial board of several Journals within Scopus containers
Share Prof. Dr. Akram Rahim Jubber is a member of the editorial board of several Scopus Journals such as Key to Engineering Materials, Energy Procedia, Technologies and Materials for Renewable Energy, Environment and Sustainability. Not To Mention that Prof .Dr. Akram Rahim Jubber has participated in an Indexing of special issue of Key to Engineering Materials magazine with other researchers under the title Advanced Materials and Application Technology II
Participates in the discussion of a master's student
A teacher from the Department of Materials Engineering at the University of Technology participates in the discussion of a master's student from the University of Babylon / College of Materials Engineering
Prof. Dr. Akram Rahim Gabr from the Department of Materials Engineering / University of Technology, Participated as a chairman in the discussion committee for master’s student "Ahmed Amer Falih" for his tagged thesis
"Fabrication of CNT -Based polymer nano composites for high electro sensitivity application by electro spinning technique"
Where the discussion, was held on Thursday, 11/18/2021. The discussion committee consisted of:
- Prof. Dr. Akram Rahim Jabr, President
- Prof. Dr. Awda Jabar Breahi member
- Assist. Prof. Dr. Saleh Abbas Habib is a member
- Prof. Dr. Hana Jawad Kazem Member
After the discussion committee recorded its observations on the thesis, which were included explanation and correction and the student’s defense of her message, and the discussion ended, the committee decided to evaluate the thesis and decided to grant the student a master’s degree with a full grade.
More...
ٍAward a master's degree
The Department of Materials Engineering at the University of Technology awarded a master’s degree to the student "Ghufran Dhafer Khaled", Department of Materials Engineering / University of Technology, for her tagged thesis.
"Fabrication and Characterization of Composite Coating by Electrostatic Spray Method"
Where the discussion took place in the Postgraduate Studies Hall in Building C in the department on Tuesday 16/11/2021, and the discussion committee consisted of:
- Prof. Dr. Alaa Abdel Hassan Attia (Chairman)
- Assist. Prof. Dr. Rana Saba Jawad (Member)
- Lect. Dr. Sura Salem Ahmed (Member)
- Lect. Dr. Muhannad Najah Jawad (Supervisor and member)
- Assist. Prof. Dr. Hana Arir Smeij (Supervisor and member)
The dissertation had evaluated scientifically by Prof. Dr. Basil Ajeel Abbas/ University of Babylon/ College of Materials Engineering and Senior Research Leader Dr. Hussain Muhammad Yousef/ Ministry of Industry and Minerals/ State Company for Steel Industries, and linguistically by Assist. Prof. Dr. Laith Waddah Ismail/ University of Technology/ Materials Engineering Department.
Abstract
316L stainless steel alloys are extensively used in orthopedic applications for the fixations and substitutions of defective bone tissues in the human body. this study attempts to increase the alloy's resistance against corrosion, and improve the bone-implant interaction by encouraging the osseointegration while maintaining its good mechanical properties, through applying a modified coating layer of PMMA-based composites with two different bio-active ceramics i.e. hydroxyapatite and titanium carbide as reinforcement materials using dry electrostatic spray deposition (ESD) under constant conditions. The biological behavior of the coated samples was studied by investigating their corrosion, antibacterial, and wetting attributes. The results revealed that a high surface wettability, good osteoconductivity, improved antibacterial, and anticorrosion attributions were also observed.
After the discussion committee recorded its observations on the thesis, which were divided between explanation and correction and the student’s defense of her message and the discussion ended, the committee decided to evaluate the thesis, and decided to grant the student a master’s degree with a full grade.
Award a doctorate degree
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student "Doaa Ahmed Yassin", Department of Materials Engineering/ University of Technology for her tagged thesis
"Improving and Microbiological Monitoring of Building Quality Using Fabricated Ceramic Nano powders"
Where the discussion took place in the Postgraduate Studies Hall in Building C in the department on Wednesday 17/11/2021, and the discussion committee consisted of:
- Prof. Dr. Ahmed Mohamed Hassan Al-Ghabban (Chairman)
- Prof. Dr. Saad Badri Hassoun (Member)
- Prof. Dr. Mohsen Abbas Aswad (Member)
- Assist. Prof. Dr. Hussein Alaa Jaber (Member)
- Assist. Prof. Dr. Ali Attia Jabr (Member)
- Prof. Dr. Farhad Muhammad Othman (Supervisor and member)
- Prof. Dr. Alaa Aladdin Abdel Hamid (Supervisor and member)
The dissertation had evaluated scientifically by Assist. Prof. Dr. Muhammad Jawad Kazim/Al-Mustansiriya University/College of Engineering/Department of Materials Engineering and Assist. Prof. Dr. Shatha Sadiq Hassan/ University of Technology/ Civil Engineering Department, and linguistically by Assist. Prof. Dr. Samir Ali Amin/ University of Technology/ Mechanical Engineering Department.
Abstract
The study aimed to improve and reduce bacterial growth and environmental pollution by using ceramic nanoparticles powders included in cement mortar. Cement mortar modified by Nano-Composite Powders (NCPs) was fabricated in order to study the effect imposed by these NCPs on the biological, physical and mechanical properties. The NCPs that were used in this study are (CuO-MgO, CuO-ZnO, and CuO-CoO). These NCPs were prepared by the sol gel method. The results show CuO-MgO, CuO-ZnO and CuO-CoO NCPs give improvement in the physical, mechanical and biological properties to a greater extent than the control cement mortar without NCPs and specifically anti-bacteria and toxicity property.
After the discussion, the committee recorded its notes on the thesis, which were split between explanation and correction, and the student’s defense of her work and the discussion ended. The committee decided to evaluate the thesis and grant the student a doctorate degree with a full grade.
Visiting the Female students of the Dorms
The chairperson of the Psychological Guidance and Educational Guidance Committee, Prof. Dr. Wafa'a Mahdi Saleh, a facility staff in the Department of Materials Engineering with a number of female students in The Dorms, on Wednesday 16/11/2021. The meeting was attended by the Director of The Dorms, Dr. Mohannad Najah Jawad, Dr. Sura Salem Ahmed, the chairperson of the Psychological Guidance and Educational Orientation Committee listened to the problems, obstacles and difficulties facing female students inside and outside the department. Mohannad Najah and Ms. Prof. Wafa'a Mahdi Promised to solve all the difficulties facing the students, and on the other hand, Prof. Wafa'a Mahdi stressed the need to adhere to the university’s instructions, including the commitment to Dress Code the appropriate dress in which reflects the identity of the university’s students, and the commitment to preventive Safety Measures to preserve the health and safety of female students.
Participates in the annual festival for the academic year 2021-2022
The Department of Materials Engineering participated in the annual festival for the academic year 2021-2022, which was held by the Student Activities Department on Monday, November 15, 2021. The Department's Football Team Had participated in the President of The University Cup's were reviewed, and the festival was attended by the President of the University of Technology, Prof. Dr .Ahmed Mohamed Hassan Al-Ghabban, and The assistant President of The University for Administrative Affairs, Prof.Dr. Hussain Hamid Karim, and Mr. Head of the Materials Engineering Department, Prof. Dr. Hussein Alaa Jaber, and The Scientific Assistant of the Department of Materials Engineering, Dr. Mohannad Najah Jawad, and The Administrative Assistant of The Department of Materials Engineering, Prof. Dr. Laith Waddah Ismail, and a number of departments Chiefs
