No

Name of research

Single/ Common (names of researchers) 

Name of journal

IF

Year of Publishing

1

Vibration damping properties of graphene nanoplatelets filled glass/carbon fiber hybrid composites

Ahmet Erkliğ

Bashar Younus , Nurettin Furkan Doğan Mohamad Alsaadi Mehmet Bulut

Bahjat Hardan Sulaiman

International Polymer Processing

2023

2

Influence of post-injection strategies and CeO₂ nanoparticles additives in the C30D blends and diesel on engine performance, NO_X emissions, and PM characteristics in diesel engine

Mohammed A. Fayad Bashar R. AL-Ogaidi

Marwa K. Abood

Hind A. AL-Salihia

Particulate Science and Technology

An International Journal

2021

3

Effect of post-injection and alternative fuels on combustion, emissions and soot nanoparticles characteristics in a common-rail direct injection diesel engine

Mohammed A. Fayad

Hind A. AL-Salihia

Hayder A. Dhahadb

Farag M. Mohammed

Bashar R. AL-Ogaidi

Energy Sources, Part A: Recovery, Utilization, and Environmental Effects

2021

4

Effect of graphene nano-platelets on mechanical and impact characteristics of carbon/Kevlar reinforced epoxy hybrid nanocomposites

Mohamad Alsaadi

Bashar Younus

Ahmet Erklig

Mehmet Bulut

Omer Bozkurt

Bahjat Sulaiman

Proceedings of the Institution of Mechanical Engineers, Part C

2021

5

Mechanical properties study of polycarbonate and other thermoplastic polymers

Sanaa A Hafad

Abdalkhalaq F Hamood, 

Hind A AlSalihi¹,

 Slafa I Ibrahim, 

Awfa A Abdullah,  Amera A Radhi, Moafaq K Al-Ghezi and Bashar R Alogaidi

IICESAT Conference, College of Material Engineering, University of Babylon, Iraq

2021

6

Effect of Thin Films of Rhodamine C Dye with Different Weights of ZnO Nanoparticles on the Performance of Si-Solar Cell

S.I. Ibrahim,

K.S. Rida

and

Bashar Al-Ogaidi

Journal of Engineering and Applied Sciences

2020

7

Investigation the Morphological Characteristics of the Particulate Matter Emissions from the Oxygenated Fuels Combustion in Diesel Engines

Mohammed A. Fayad Bashar R. AL-Ogaidi

Engineering and Technology Journal

Vol. 37, Part A, No. 10, 2019  

2019

8

EFFECT OF GRAPHENE NANO-PLATELETS ON IMPACT PROPERTIES OF CARBON-KEVLAR COMPOSITES

Ahmet Erkliğ,

Bahjat Hardan Sulaiman

Omar Abdulrahman Abood Al-dulaimi,

Bashar Ridha Younus

2nd International Energy & Engineering Conference

2017

9

EFFECT OF GRAPHENE NANO-PLATELETS ON IMPACT PROPERTIES OF CARBON-GLASS COMPOSITES

Ahmet Erkliğ,

Bashar Ridha Younus,

Omar Abdulrahman Abood Al-dulaimi,

Bahjat Hardan Sulaiman

2nd International Energy & Engineering Conference

2017

10

EFFECT OF JUTE FIBER HYBRIDIZATION ON IMPACT RESPONSE OF GLASS FIBER/ EPOXY COMPOSITE LAMINATES

Ahmet Erkliğ,

Abdullah Hameed Khalaf

Omar Abdulrahman Abood Al-dulaimi,

Bashar Ridha Younus

2nd International Energy & Engineering Conference

2017

No

Name of research

Single/ Common (names of researchers) 

Name of journal

IF

Year of Publishing

1

Effect of nickel – Graphene addition on the 3D printed 17-4 PH stainless steel

Ali A Muhsan,

Hind B Ali, Mohammed S Hamza, Rana A Anaee

Results in Engineering Journal

2023

2

Characterization of Ni-base Matrix Composite Coating produced by Thermal Spray Technique,

Hanaa A Al-Kaisy, Niveen Jamal Abdulkader,

Mena F Khdheer,

Hind B Ali,

Journal of Nanostructures, vol. 13, issue 2, pp453-461

2023

3

Experimental investigation and statistical modelling for assessing the sliding wear of Futilized Filament Fabrication (FFF) fabricated parts,

Hind B. Ali,

Haider Basil Ali, Mukhallad H Shawish, Saad K. Hasan

Periodicals of Engineering and Natural Sciences, Volume 11, Issue 2, Pages 248 – 261

2023

4

The Effect of FDM Process Parameters on the Compressive Property of ABS Prints,

Tahseen Fadhil Abbas, Khalida Kadhim Mansor,

Hind Basil Ali

Journal of Hunan University (Natural Sciences), vol.49, issue 7, pp 154-162

2022

5

Compressive and Tensile Properties of ABS Material as a Function of 3D Printing Process Parameters

Hind B. Ali,

Jawad K. Oleiwi,

Farhad M. Othman

Revue des Composites et des Matériaux Avancés, vol.32, N0. 3

2022

6

Characterization of fatigue properties of 3D printed polylactic acid,

Hind B. Ali,

Dalia R. Alazawi

Periodicals of Engineering and Natural Sciences (PEN), vol.10, No.3

2022

7

Influence of FDM Process Variables' on Tensile Strength, Weight, And Actual Printing Time When Using Abs Filament,

Tahseen Fadhil Abbas, Hind Basil Ali,

Kalida Kadhim Mansor

International Journal of Modern Manufacturing Technologies, Vol. XIV, No.1/

2022

8

Influence of layer bonding on compressive strength of 3D printed structure: An experimental study,

Hind B. Ali,

Dalia R. Alazawi,

Sustainable Engineering and Innovation journal, vol4, issue 1, pp76-81

, 2022

9

Continuous Quality Improvement in Health Care/ literature review

Sara Mohammed Al-Waheed, Sawsan S. Al-Zubaidi, Hind B. Ali,

International Conference on Science, Engineering Management and Information Technology (SEMIT 2022), February 2-3,2022 in Ankara/ Turkey

2022

10

The Effect of Process Parameters on the Compression Property of Acrylonitrile Butadiene Styrene Produced by 3D Printer

Sabreen A. Oudah,

Hind B. Al-Attraqchi, Nassir A. Nassir,

Engineering and Technology Journal, vol.40 no.1, pp. 189-194

2022

11

Influence of Process Parameters on Mechanical Properties and Printing Time of FDM PLA Printed Parts Using Design of Experiment

Farhad M. Othman, Tahseen Fadhil Abbas, Hind Basil Ali

Journal of Engineering Research and Applications (IJERA), vol.8, issue:7 part (II), pp65-69

2018

12

Instigation and Analysis of Infill Density on Impact Property

Tahseen Fadhil Abbas, Farhad Mohammad Othman, Hind Basil Ali,

International Journal of Research Science & Management (IJRSM), vol.5, no.2

2018

13

Influence of Layer Thickness on Impact Property of 3D-Printed PLA

Tahseen Fadhil Abbas, Farhad M.Othman,

Hind Basil Ali

International Research Journal of Engineering and Technology (IRJET), Volume: 05 Issue: 02, pp1-4

2018

14

Effect of infill Parameter on compression property in FDM Process

Tahseen Fadhil Abbas, Farhad Mohammad Othman, Hind Basil Ali,

International Journal of Engineering Research and Applications (IJERA), vol.7, issue 10, part II, pp16-19

2017

15

Influence of Layer Thickness on Compression Property of 3D-Printed PLA,

Tahseen Fadhil Abbas, Farhad Mohammad Othman, Hind Basil Ali,

Al-Mohandas Journal (JMISE), vol.154, no. (4), pp. 41- 48

2017

16

Effect of cigarettes smoking yields on corrosion behavior of amalgam in artificial saliva at PH=6.2 and 37⁰C

Dr. Rana Afif Majed, Majid H. Abdulmajeed, Hind B. Al-Atrakchy, Slafa I. Ibrahem and Eng. Mohanad M. Sadeq,

International Journal Of Current Research, vol. 6, isuue11, pp9657-9663

2014

17

Carbonation of Steel in Reinforced Concrete in different waters

Hind Basil Ali , Shatha Riyadh Ahmed Ezzat, Ali A. Muhsin,

Engineering & Technology Journal University of Technology, vol. 32 part (A), No.12,

2014

18

Experimental Study and Mathematical Modeling for Corrosion of Amalgam at Different Periods

Rana A. Majed, Khawla Abdul kathem Ali, Hind B. Al-Atrakchy, Hawraa D.Al-Deen,

Tikrit Journal for Dental Sciences, vol. 3, issue 1,

2014

19

Effect Of Reinforced by Coconut Fiber Core on The Mechanical Properties for Un-Saturated Polyester Matrix Composite Material

Hind Basil Ali

Engineering & Technology Journal, University of Technology, vol.31, no.17

2013

20

Effect of SiO2 the mechanical properties of (Al-Cu-Mg) alloy

Dr. Alaa Hasan Ali, Hind Basil,

Mirvet M. Al-Jnabi

International conference on Advanced Manufacturing Technology ICAMT, Chennai Institute of Technology, Chennai, India, and 15-17 JUNE 2012.

2012

21

Study the structure properties of semiconductor film multilayered

,Hind Basil Al-Atraqji, Hanaa Arer Al.Kaisy,

Al-khwarizimi College of engineering, vol6, No.2, pp93-99

2010

22

Study the reasons for the increase in the proportion of damage in the dry clay and the phenomenon of effloresce for pottery brick

Hind Basil Ali

Engineering & Technology Journal, University Of Technology, vol. 27, No.12

2009

23

Material selection techniques by using computer

Dr.Mithal A. al-Bassam, Hind B. Al-Atraqgy,

Engineering & Technology Journal, University of Technology, vol. 27, No.4

2009

24

Effect of chloride iond on the corrosion behavior of Al-Zn alloy in NaOH solution at four different temperatures

Rana A. Majed , Hanaa A. Al-Kaisy, Hind B. Al-Atrakchy

Al-khwarizimi College of Engineering, vol. 4, No.4, pp26-36

2008