No

Name of research

Single/ Common (names of researchers) 

Name of journal

IF

Year of Publishing

1

Mechanical and structural characteristics of ZnO: Cu thin Film

Ali A. Rageh; Abbas K. Hussein; Laith K. Abbas

Electromechanical Engineering and its Applications AIP Conf. Proc. 3002, 060013-1–060013-8; https://doi.org/10.1063/5.0209737 Published under an exclusive license by AIP Publishing. 978-0-7354-4939-8/$30.00, AIP Conf. Proc. 3002, 060013 (2024), https://doi.org/10.1063/5.0209737

2024

2

Improved acrylonitrile-butadiene-styrene surface properties via electroless (NiP-SiC) nanocomposite coating

Rusul Khalid Alhamad, Abbas Khammas Hussein , Laith Kais Abbas

Chemical Physics Impact 7 (2023) 100375, Contents lists available at ScienceDirect, Published by Elsevier B.V.

2023

3

Enhanced alumina substrate wear resistance via electroless NiP–TiC nanocomposite coating

Rusul Khalid Alhamad, Abbas Khammas Hussein , Laith Kais Abbas

Results in Materials 20 (2023) 100466, contents lists available at ScienceDirect, Published by Elsevier B.V.

2023

4

Synthesis and Characterization of NiP-TiC-SiC Nanocomposite Coating via Electroless Process on Alumina Substrate

Rusul Kh. Abd, Abbas Kh. Hussei, Laith K. Abbas

Engineering and Technology Journal 41 (12)

2023

5

Effect of laser energy and substrate temperature on the optical and structural characteristics of ZnO: Cu thin film

Ali A. Rageh; Abbas K. Hussein; Laith K. Abbas

”, AIP Conference Proceedings 2830, 030019 (2023), 4^th International Scientific Conference of Engineering Sciences and Advances Technologies AIP Conf. Proc. 2830, 030019-1–030019-7; https://doi.org/10.1063/5.0157508; Published by AIP Publishing. 978-0-7354-4585-7/$30.00.

2023

6

A study of cracked nano composite plates under mechanical buckling load

Zainab K. Younus, Kawther K. Younus, Laith K. Abbas, Abbas K. Hussein

AIP Conference Proceedings 2830, 070011 (2023), 4^th International Scientific Conference of Engineering Sciences and Advances Technologies, AIP Conf. Proc. 2830, 070011-1–070011-9; https://doi.org/10.1063/5.0158072, Published by AIP Publishing. 978-0-7354-4585-7/$30.00.

2023

7

Improving the Properties of a Polyester-Based Composite Using Nanoparticle Fillers

Zainab K. Younus, Laith K. Abbas, Abbas Kh. Hussein

Engineering and Technology Journal, 39 (11)

2021

8

Experimental Study of Cutout Parameters Effect on the Buckling Behavior of Plates

Zainab K. Younus, Laith K. Abbas, Abbas Kh. Hussein

Advances in Mechanics,  Vol. 9, No. 3

2021

9

Buckling of Nanocomposite Plates with Cutouts

Zainab K. Younus, Laith K. Abbas, Abbas Kh. Hussein

Advances in Mechanics,  Vol. 9, No. 3

2021

10

A Desirability Function for Evaluation of Corrosion Behavior for Nanocoated- Steel Using Electroless Technique

Muroog M. Shinyar, Abbas Kh. Hussein, Laith K. Abbas

Engineering and Technology Journal Vol. 39, No. 06

2021

11

OPTIMIZATION OF MECHANICAL BEHAVIOR OF NI-P NANOCOMPOSITE COATINGS USING TAGUCHI APPROACH

MUROOG M. SHINYAR, LAITH K. ABBAS, ABBAS KH. HUSSEIN

International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249–6890; ISSN (E): 2249–8001 Vol. 10, Issue 1, Feb 2021, 99–110 © TJPRC Pvt. Ltd

2021

12

OPTIMIZATION OF CORROSION RESISTANCE FOR ELECTROLESS NANOCOATED CARBON STEEL USING TAGUCHI APPROACH

SAMA Z. ALI, LAITH K. ABBAS, ABBAS K. HUSSEIN

International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249–6890; ISSN (E): 2249–8001 Vol. 11, Issue 3, Jun 2021, 397-404 © TJPRC Pvt. Ltd

2021

13

Optimization of Electroless Ni-P, Ni-Cu-P and Ni-Cu-P-TiO₂ Nanocomposite Coatings Microhardness using Taguchi Method

SAMA Z. ALI, LAITH K. ABBAS, ABBAS K. HUSSEIN

IOP Conference Series: Materials Science and Engineering, INTCSET 2020 IOP Conf. Series: Materials Science and Engineering 1094 (2020) 012168 IOP Publishing doi:10.1088/1757-899X/1094/1/012168

2020

14

Multi-Objective Optimization of Friction Stir Welding for Aluminum Alloy (2024-T3)

Abbas K. Hussein, Laith K. Abbas, Ahmed A. Seger

Engineering and Technology Journal, Vol. 38, Part A, No.02

2020

15

DESIRABILITY OPTIMIZATION OF MECHANICAL BEHAVIOR FOR FRICTION STIR WELDED ALUMINIUM ALLOY (AA2024-T3)

ABBAS KH. HUSSEIN, LAITH K. ABBAS, AHMED A. SEGER

International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249–6890; ISSN (E): 2249–8001 Vol. 9, Issue 5, Oct, 1111–1128 © TJPRC Pvt. Ltd

2019

16

Effect of Quenching Media Variations on the Mechanical Behavior of Martensitic Stainless Steel

Abbas Kh. Hussein, Laith K. Abbas, Wisam N. Hasan

Al-Khwarizmi Engineering Journal, Vol. 15, No. 2, June

2019

17

Optimization of steel hardness using nano fluids quenchants

Abbas KH. Hussein, Laith K. Abbas, Wisam N. Hasan

Kufa Journal of Engineering, Volume 10, Issue 1

2019

18

Optimization of Heat Treatment Parameters for the Tensile Properties of Medium Carbon Steel

Abbas KH. Hussein, Laith K. Abbas, Wisam N. Hasan

Engineering and Technology Journal, Volume 36, Issue 10, Part (A)

2019

19

Multiple Performance Optimization of Carburized Steel Using Taguchi Based Moora Approach

Abbas KH. Hussein, Laith K. Abbas, Asraa K. Hameed

Engineering and Technology Journal, Volume 36, Issue 7, Part (A)

2018

20

Investigation corrosion and mechanical properties of carburized low carbon steel

Abbas KH. Hussein, Laith K. Abbas, Asraa K. Hameed

Journal of Engineering and Sustainable Development, Volume 22, Issue 02, Part-6

2018

21

Effect of Carburization Parameters on Hardness of Carburized Steel Using MOORA Approach

Abbas KH. Hussein, Laith K. Abbas, Asraa K. Hameed

Al-Khwarizmi Engineering Journal, Volume 14, Issue 3

2018

22

Study the Characterizations of Cement Mortar by Nano Pozzolanic Materials Additions

Fadhil A. Rasin, Laith K. Abbas, Mohammed J. Kadhim

Al-Khwarizmi Engineering Journal, Volume 13, Issue 4

2017

23

Study the Effects of Nano-Materials Addition on Some Mechanical Properties of Cement Mortar

Fadhil A. Rasin, Laith K. Abbas, Mohammed J. Kadhim

Engineering and Technology Journal, Volume 35, Issue Part A

2017

24

Study the effect of nano materials addition on some properties of cement mortar

Fadhil A. Rasin, Laith K. Abbas, Mohammed J. Kadhim

Journal of Engineering and Sustainable Development, Volume 21, Issue 5

2017

25

Antibacterial Activity of Electrospun Silver Nitrate /Nylon 6 Polymeric Nanofiber Water Filtration Mats

Akram R. Jabur, Laith K. Abbas, Saja A. Moosa

Al-Khwarizmi Engineering Journal, Vol. 13, No. 1

2017

26

MULTIPLE OBJECTIVE OPTIMIZATION OF WELD GEOMETRY OF DISSIMILAR METALS

Assist. Prof. Dr. Abbas KH. Hussein, Assist. Prof. Dr. Laith K. Abbas, Dr. Jamal J. Dawood

The Iraqi Journal for Mechanical and Material Engineering, Vol. 16, No. 4

2016

27

Fabrication of Electrospun Chitosan/Nylon 6 Nanofibrous Membrane toward Metal Ions Removal and Antibacterial Effect

Assist. Prof. Dr. Akram R. Jabur, Assist. Prof. Dr. Laith K. Abbas, Saja A. Moosa

Hindawi Publishing Corporation, Advances in Materials Science and Engineering, Volume 2016, Article ID 5810216, 10 pages, http://dx.doi.org/10.1155/2016/5810216

2016

28

Modeling of Carburization Parameters Process for Low Carbon Steel

Assist. Prof. Dr. Abbas KH. Hussein, Assist. Prof. Dr. Laith K. Abbas, Dr. Jamal J. Dawood, Nadeen Jaafar Ismae

Eng. & Tech. Journal, Vol. 34, Part (A), No.6

2016

29

Ambient Temperature Affect the Pore size of PVA Nanofibers Tissues

Assist. Prof. Dr. Akram R. Jabur, Assist. Prof. Dr. Laith K. Abbas, Safa M. Muhi Aldain

The 5^th International scientific Conference on Nanotechnology & Advanced Materials Their Applications (ICNAMA 2015) 3-4 Nov, Eng. &Tech. Journal, Vol.33, Part (B), No.6

2015

30

The effect of operating parameter on the morphology of electrospun poly vinyl alcohol nanofibers

Assist. Prof. Dr. Akram R. Jabur, Assist. Prof. Dr. Laith K. Abbas, Safa M. Muhi Aldain

The international 3^rd. Scientific Conference of The College of Science, JOURNAL OF UNIVERSITY OF KERBALA, An Academic Journal Adopted for Scientific Promotions Issued by, University of Karbala

2015

31

Finite Element Analysis Using MATLAB of Oxidation Kinetics in Air of Steel-T21 Alloy Coated by Simultaneous Germanium-Doped Aluminizing-Siliconizing Process

Assist. Prof. Dr. Abbas KH. Hussein, Assist. Prof. Dr. Laith K. Abbas, Assist. Prof. Dr. Emad S. Al-Hasany

International J. of Eng. Research & Indu. Appls. (IJERIA). ISSN 0974-1518, Vol.6, No. II

2013

32

Study of the effect of acetone dilution percentage on mechanical properties of epoxy - acetone system

Dr. Laith Kais Abbas AL-Haidary

The Iraqi journal of mechanical and materials engineering, Vol.11, No.2

2011

33

Study of Polymer Quenchants Effect on Some Properties of low alloy steel type (St37)

Assist. Prof. Dr. Waleed A. Hana, Dr. Laith K. Abbas, Manar .A. Najim

Engineering & technology journal, Vol.28, No.5

2010

34

Study of Polymer Quenchants Effect on Some Properties of alloyed tool steel (X155)

Assist. Prof. Dr. Waleed A. Hana, Dr. Laith K. Abbas, Manar .A. Najim

Engineering & technology journal, Vol.28, No.4

2010

35

Study of Polymer Quenchants Effect on Some Properties of Stainless Steel alloy (316L)

Assist. Prof. Dr. Waleed A. Hana, Dr. Laith K. Abbas, Manar. A. Najim,

Engineering & technology journal, Vol.27, No.10

2009

36

Preliminary design to find the average diameter of a steam turbine stages

Prof. Dr. Assim H. Y. Al-Darajy, Dr. Laith K. Abbas. Al-Haidary

Journal of engineering, No.4, Vol.10, December

2003

37

Preliminary design for first stage of supercritical pressure steam turbine

Prof. Dr. Assim H. Y. Al-Darajy, Dr. Laith K. Abbas. Al-Haidary

Baghdad fifth scientific conference / College of engineering – mechanical engineering fourth axis

2003