اخبار القسم en
A doctoral candidate from the Materials Engineering Department qualified for the final stage of the thesis competition in three minutes
Written by عضو ارتباط
A doctoral candidate from the Materials Engineering Department qualified for the final stage of the thesis competition in three minutes
The doctoral candidate, Nour Ibrahim Ali Jan, from the Department of Materials Engineering, qualified for the Three Minutes Thesis Competition, which concluded on Wednesday, 3/27/2024, where it witnessed wide participation and intense competition among thirty contestants from all university departments, and after continuous efforts, 9 contestants qualified for the stage. Among the finalists is doctoral student Nour Ibrahim, who will have the opportunity to present her thesis
"Fabrication and Characterization of Hybrid Composite Tissue Engineering Scaffold For Bone Growth by Electrospinning"
The main target of this dissertation is remediation of osteoporosis satisfactory، which results from many reasons (e.g. Aging, smoking, heredity...). More than two types of bio-polymers were mixed, in-order to produce scaffold which improves bone growth factor without negative side effects.
The Department of Materials Engineering congratulates the student’s active participation and exceptional presentation and wishes her every success
The Department of Materials Engineering holds a course
Written by عضو ارتباط
The Department of Materials Engineering held a course entitled: "Work mechanism and how to calculate bonuses and promotions"
This was on Sunday, 3/25/2024, at nine o’clock in the morning in the Graduate Studies Hall/Building B, where lectured by the Administrative Assistant, Asst.Prof .Dr. Laith Waddah Ismail and Mrs. M.R. Specialists Shaima Youssef Jumaa, and Chief Engineers Hasna Fawzi Hassan, in the presence of the head of the department, The respectables Prof. Dr. Jawad Kadhum Aliwi and the scientific assistant, Prof. Dr.Kadhum Matar Shabib and a number of the department’s teachers and employees. The course included the concept of the basic rules for calculating bonuses and promotions and what are the points that speed them up or delay them.
At the end of the lecture, the head of the department praised the distinguished efforts made by the lecturers and presented them with certificates of appreciation.
The Department of Materials Engineering presents the shield of the eleventh cultural season to the President of the University of Technology
Written by عضو ارتباط
Under the sponsorship of the Honorable President of the University of Technology, Pro. Dr. Ahmed Muhammad Hassan Al-Ghaban, and under the supervision of the Head of the Materials Engineering Department, Prof. Dr. Jawad Kadhim Olaiwi, the eleventh cultural season for the academic year 2023-2024 has been settled.
After distributing certificates of appreciation to members of the Cultural Season Committee and in the presence of the Scientific Assistant, Prof. Dr. Kazem Matar Shabib and Administrative Assistant Assist. Prof .Dr. Laith Waddah Ismail and Director of the Internal Department Affairs Department, Assist. Prof .Dr. Muhannad Najah Jawad, the Head of the Materials Engineering Department, Prof. Dr. Jawad Kadhim Olaiwi presented cultural season shield to the President of the University, Prof. Dr. Ahmed Muhammad Hassan Al-Ghabban for his unlimited support and sponsorship of all scientific, cultural and entertainment events on Sunday, 17/3/2024.
The Department of Materials Engineering honors the Chairperson and members of the Eleventh Cultural Season Committee
Written by عضو ارتباط
The Head of the Materials Engineering Department, Prof. Dr. Jawad Kazem Aliwi, honored the chairperson and members of the eleventh cultural season, on Wednesday, 13/3/2024. The head of the department praised their outstanding efforts to make this season a success, as the season included many events, including seminars, workshops, an exhibition, and sports competitions, and urged them to make more efforts to raise the name of the department, and presented them with a certificate of appreciation and a cultural season medal.
The Department of Materials Engineering holds a scientific symposium
Written by عضو ارتباط
The Materials Engineering Department held a scientific symposium entitled
“Sustainable materials and plastic recycling (processes related to climate change”
It was on Tuesday, 12/3/2024, at 11 in the morning in the Graduate Studies Hall/Building B, where Prof. Dr. Muhammad Abdel Hussein Al-Zuhairi, in the presence of the Head of the Department, Prof. Dr. Jawad Kazem Aliwi and the scientific assistant, Prof. Dr. Kazem Matar Shabib and Mr. Administrative Assistant, Asst. Prof. Dr. Laith Wadah Ismail and a number of the department’s teaching staff and members. The symposium included the concept of sustainability and its three pillars related to the economic, environmental and social aspects and the provision of clean, renewable materials and energy. The lecturer also touched on opportunities to improve the research environment in Iraq as one of the most important means in the country’s renaissance and the production of clean and renewable energy. Green hydrogen and solid waste recycling processes as one of the radical solutions to save energy, protect the environment, and strengthen the economy in Iraq.
At the end of the lecture, the Head of the Department praised the distinguished efforts made by Prof. Dr. Muhammad Al-Zuhairi and presented him with a certificate appreciation.
The Materials Engineering Department conducts a volunteer afforestation campaign
Written by عضو ارتباط
Referring to the Department of Affairs letter, No. 164, dated 25/2/2024, and on the occasion of National Planting Day, the Materials Engineering Department held a volunteer planting campaign and hanging posters on Tuesday, 12/3/2024, at ten in the morning, under the direct supervision of the Head of the Department, Prof. Dr. Jawad Kazem Aliwi, with the participation of a group of the department’s teaching staff, employees, and students.
The Materials Engineering Department holds a workshop
Written by عضو ارتباط
The Department of Materials Engineering, in cooperation with the Center for Nanotechnology and Advanced Materials Research, held a workshop entitled:
"The benefits of afforestation for humans and the environment"
It was on Tuesday, 12/3/2024, at nine in the morning, in the seminar hall at the Center for Nanotechnology and Advanced Materials, Eng. Engineer Huda Abbas Zidan, and in the presence of the Assistant President of the University for Administrative Affairs, Prof. Dr. Farhad Muhammad Othman, a ministerial committee responsible for afforestation, and a group of teaching staff and associates. The workshop included the importance of afforestation, the importance of afforestation and planting plants and trees that contribute to purifying the air and reducing temperatures, in addition to reducing desertification, dust storms and other many benefits of trees. All of this contributes to spreading this culture and constantly educating the community to urge them to establish such initiatives.
At the end of the workshop, the Administrative Assistant, Prof. Dr. Farhad Muhammad Othman praised Eng. Huda Abbas for her valuable lecture and the efforts made and encouraged such initiatives because they are beneficial to the public interest. She was presented with a certificate of appreciation.
The Department of Materials Engineering at the University of Technology awarded a doctorate degree to the student, Hawra Uday Abbas, Department of Materials Engineering / University of Technology for her thesis titled
"Cold sintering of ceramic matrix composites biomaterials"
The discussion took place in the postgraduate hall located in Building B within the department on Wednesday, 6/3/2024 at nine o'clock in the morning, and the discussion committee consisted of ladies and Gentlemen
Prof. Dr. Shehab Ahmed Zidane Chairman
Prof. Dr. Mohsen Abbas is black member
Assist. Prof. Dr. Mayada Shanan Abd member
Assist. Prof. Dr. Iyad Kazem Hassan member
Assist. Prof. Dr. Ahmed Hussein Ali member
Assist. Prof. Dr. Hana Arir Smej as a member and supervisor
Prof. Dr. Zuhair Jabbar Abdul Amir as a member and supervisor
In addition, the thesis has scientifically evaluating by Assist prof. Israa Qahtan Sabri/University of Babylon/College of Materials Engineering, and Assist. Prof. Muzaffar Ali Muhammad/University of Technology/Department of Applied Sciences, and linguistically by Lecturer Dr. Ali Abdul Karim Mohsen/University of Technology/Department of Materials Engineering
After the examination committee recorded its comments on the thesis, which covered both explanation and correction, the student's defense of her thesis, and the conclusion of the discussion, the committee convened to evaluate the thesis. They decided to award the student a doctorate degree with a pass grade
Abstract:
The aim of this study was to use novel technique of very low-temperature sintering named the cold sintering process to produce highly dense of hydroxyapatite and hydroxyapatite-polyetheretherketone (HA-PEEK) nanocomposites.
Nano hydroxyapatite (17-35 nm) was prepared using two different routes: synthesis by chemical precipitation method (HA1) and natural source from boven bone (HA2). Nano HA- PEEK composite was fabricated using two different routes: The direct mixing and dissolution methods(using toluene and tetrahydrofuran). The sintering temperature, pressure, holding time, and PEEK content were selected as the production parameters. The optimum cold sintering parameters for producing dense Nano HA and nano HA-PEEK composite samples was determined via using the Taguchi method.
It can be concluded that cold sintering is a good process for densifying ceramics and composite with little energy consumption. All samples exhibit excellent hydrophilicity. Furthermore, the HA-PEEK composite exhibited good pre-osteoblast cell (MC3T3-E1) adhesion, spreading, and proliferation. Histological study indicate a new bone formation with osteocyte cells around all implants after 6 weeks of implantation.
The Department of Materials Engineering honors students who participating in the Graduation Projects Exhibition
Written by عضو ارتباط
The head of the Materials Engineering Department, Prof. Dr. Jawad Kazem Aliwi, honor the department’s students who participated in the graduation projects exhibition on Wednesday, 3/6/2024, at eleven in the morning in Hall No. 6 / courtyard of Building A. He praised them for their remarkable scientific efforts and encouraged them to move forward in their scientific career.
The Department of Materials Engineering organizes sports competitions for the department’s students
Written by عضو ارتباط
As part of the activities of the eleventh cultural season, and in cooperation with the Ministry of Youth and Sports, the Department of Materials Engineering organized sports competitions for the department’s students
This competitions held on Wednesday, 3/6/2024, at ten morning on the football field, in the presence of the Scientific Assistant, Prof. Dr. Kazem Matar Shabib with participated a number of the department’s students, in order to recognize the importance of practicing sports and enhancing the sports spirit among the department’s students.
At the end of the competitions, the Scientific Assistant, Dr. Kazem Matar, distributed medals and symbolic gifts to the winning students.
More...
The Department of Materials Engineering holds an awareness seminar
Written by عضو ارتباط
As part of the activities of the eleventh cultural season, the Department of Materials Engineering held an awareness seminar entitled “The Role of the Media in Combating Extremism”
The seminar held on Wednesday, March 6, 2024, at nine o’clock in the morning in Hall No. 4 / courtyard of Building A,
The Seminar was presented by Eng. Iman Kazem Hamza, in the presence of the head of the department, Prof. Dr. Jawad Kazem Aliwi and the scientific assistant, Prof. Dr. Kazem Matar Shabib and Mr. Administrative Assistant, D. Laith Waddah Ismail and a number of the department’s teachers and students.
The symposium aimed to clear the importance of the media and the importance of its role in various areas of life and in all aspects of educational, cultural and security life, as the media aims to combat extremism and violence among young people in particular and find ways to prevent and treat it.
At the end of the lecture, the head of the department praised the remarkable efforts made by the teaching staff. Iman Kazem and honor her with a certificate, and a shield of excellence.
The Materials Engineering Department Organized a workshop
Written by عضو ارتباط
The Materials Engineering Department, in collaboration with the Department of Laser and Optics Engineering, conducted a workshop titled "The Role of Psychological Counseling and Educational Guidance in Developing the Educational Process" as part of the eleventh cultural season's activities.
The workshop took place on Tuesday, 3/5/2024, at nine-thirty in the morning in the conference hall of the Civil Engineering Department.
The lecture has been delivered by Assist. Prof. D. Firas Abbas Fadel in the presence of the Scientific Assistant, Professor Dr. Kazem Matar Shabib, and the Administrative Assistant, D. Laith Wadah Ismail, addition to several department teachers, staff, and students.
The workshop covered the significance of psychological counseling in enhancing the educational process and addressing deviant behaviors, including issues related to drugs and harassment. Additionally, it inquired into methods for treating addiction and the application of mental health principles.
Finally, the Scientific Assistant commended the outstanding efforts of D. Firas Abbas Fadel and presented him with a certificate of appreciation and an excellence shield.
The Department of Materials Engineering holds a discussion lecture
Written by عضو ارتباط
As part of the activities of the eleventh cultural season, the Department of Materials Engineering held a discussion lecture entitled “Clean Energy and its Fields”
This will be on Monday, 3/4/2024, at ten in the morning in the Graduate Studies Hall/Building B, where Lectered by. Lect. Dr. Shams Basil Ali, in the presence of the head of the department, Prof. Dr. The respected Jawad Kazem Aliwi and the scientific assistant, Prof. Dr.Kazem Matar Shabib, and the administrative Assistant, Asst.Prof.Dr. Respected Laith Wadah Ismail and a number of the department’s teachers and employees. The lecture included an introduction to clean energy, its types, and its importance in reducing global warming and environmental pollution. Its applications in the industrial and agricultural fields, transportation, and daily life were also discussed.
At the end of the lecture, the head of the department praised the distinguished teaching efforts made by Lect.Dr. Shams Basil Ali presented her with a certificate of appreciation and a shield of excellence.
The Department of Materials Engineering holds an exhibition of graduation projects for undergraduate students
Written by عضو ارتباط
The Department of Materials Engineering, as part of the activities of the eleventh cultural season, organized an exhibition of graduation projects for undergraduate students on Monday, 3/4/2024, at nine in the morning in the courtyard of Building A. The Administrative Assistant to the University President, Prof. Dr. Farhad Muhammad Othman, and under the direct supervision of the Head of the Department, Prof. Dr. Jawad Kazem Aliwi and the scientific assistant, Prof. Dr. Kazem Matar Shabib praised all the projects and praised the work of the students and their motivation for outstanding work in the projects.
